Industry Directory | Manufacturer / Other
We are Japanese based solder manufacturer under Nihon Genma Mfg Co Ltd. Our company located in Malaysia and we distribute solder products worldwide. We are looking for aggresive business partner around the world. Contact us!!
Industry Directory | Manufacturer
TTPL is a reputed EMS(Electronic Manufacturing Service) company offering PCBA, testing and box build on turnkey basis. Certified to ISO/TS16949, TTPL has been offering assembly services at superior quality since 1992.
New Equipment | Rework & Repair Equipment
Ultimate Performance, BGA Rework Station for small-large PCBs up to 24"/620mm The PDR E6 XL BGA Rework Station is made of only the finest materials and components for optimum precision and rework excellence. PDR's E6 SMD Rework Station is PDR's larg
Click here to view the SlimKIC 2000 datasheet Profiling So Easy, Anyone Can Do It By automating the complex task of process set up the SlimKIC® 2000™ makes profiling so easy that any operator can quickly achieve the optimal process. Simply select fro
Electronics Forum | Fri Apr 22 15:59:42 EDT 2005 | Valerie
Besides poor printing using cold solder paste will also cause solder beading.
Electronics Forum | Tue Apr 19 07:37:48 EDT 2005 | mirrindolan
I am looking for all the reasons why operators and stores must let solder paste reach room temperature. I am trying to make it is as easy as possible for everyone to understand. I have compiled all the obvious reasons but I am open to all comments an
Used SMT Equipment | Soldering - Reflow
SMTmax reflow oven family of high-throughput thermal processing system is widely recognized as the global standard of excellence for both printed circuit board solder reflow and for semiconductor packaging. SMTmax F6 systems provide optimized lead-f
Industry News | 2005-09-19 16:07:56.0
No higher temperature and No process changes needed
Industry News | 2020-09-01 12:20:14.0
MIRTEC today announced its participation in the SMTA International Virtual Conference & Expo. The Live Virtual Exposition is scheduled to take place Sept. 28-30, 2020.
Technical Library | 2020-12-07 15:26:06.0
Temperature cycling testing is a method of accelerated life testing done to PCCs that are exposed to normal operation temperature variations over its lifetime. During the testing, intermittent "open" failures can first occur at the hot and cold extremes of the test, exposing weaknesses in the design and assembly. A poor/weak solder joint fatigues, a via trace or barrel cracks, loose connections or a component fails all causing an intermittent open. When not at extreme temperatures, the PCC assembly relaxes, the "open" closes creating electrical connectivity. If you are monitoring the PCC under test in-situ you will know that an intermittent failure has occurred, and the test could be stopped for inspection. If in-situ monitoring was not implemented, you would not know if there were intermittent failures or not. The PCC gets powered up and works fine at room temperature.
Technical Library | 2017-05-17 22:33:43.0
The selective soldering application requires a combination of performance attributes that traditional liquid fluxes designed for wave soldering applications cannot fulfill. First, the flux deposition on the board needs to be carefully controlled. Proper fine tuning of the flux physicochemical characteristics combined with a process optimization are mandatory to strike the right balance between solderability and reliability. However, localization of the flux residue through the drop jet process is not enough to guarantee the expected performance level. The flux needs to be designed to minimize the impact of unavoidable spreading and splashing events.From this perspective a fundamental understanding of the relationships between formulation and reliability is critical. In this application, thermal history of the flux residues (from room temperature to solder liquidus) is a key performance driver. Finally, it is necessary to conduct statistically designed experiments on industrial selective soldering machines in order to map the relationships between flux characteristics and selective process friendliness.
Lyra Reflow Oven is a soft soldering that realizes the mechanical and electrical connection between the solder ends of surface mount components or the pins and the printed board pads by remelting the solder paste pre-distributed on the printed board
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
Events Calendar | Thu Oct 03 00:00:00 EDT 2019 - Thu Oct 03 00:00:00 EDT 2019 | ,
IPC Tech Ed Webinar Series: Ball Grid Array (BGA) and Bottom Termination Component (BTC) Design and Assembly Challenges: Reflow Profiling to Achieve Low Defect Rates and Successful Assembly! – Part 2
Career Center | Colton, California USA | Engineering,Maintenance,Production,Quality Control,Research and Development,Technical Support
• Strong experience with the installation, training, and repair on a variety of electro-mechanical, pneumatic, PLC, or computer controlled systems. • Strong Knowledge in SMT equipment, Screen Printer, AOI/SPI, Conformal Coat Systems, Reflow oven, X-R
,989, Users: 41,258 Room Temperature Fast Flow Reworkable
.jpg)
