New Equipment | Board Handling - Pallets,Carriers,Fixtures
* Provides dimensionally stable support platform for PCB * Protects SMT components from heat or thermal shock * Reduce/eliminate manual labor for hand masking operation, glue dotting, and hand soldering * Reduce solder defects (ex. Bridges and skips)
New Equipment | Board Handling - Pallets,Carriers,Fixtures
With MB Manufacturing’s continuous improvement strategy we have developed the ultimate selective solder fixture out of a combination of titanium and composite, incorporating the latest in flow technologies to eliminate skips and bridges on a selectiv
Electronics Forum | Fri May 07 22:27:41 EDT 1999 | Big K
My company has a product line that utilizes multi-up PCB's. In order to cut costs for this product line, I have been asked to look into ways of running panels that contain bad blocks. Our SMT equipment is quite capable of doing this, but I need to k
Electronics Forum | Sat May 08 11:53:52 EDT 1999 | Scott Cook
| My company has a product line that utilizes multi-up PCB's. In order to cut costs for this product line, I have been asked to look into ways of running panels that contain bad blocks. Our SMT equipment is quite capable of doing this, but I need to
Industry News | 2018-10-18 10:25:53.0
Marking Diode Poles on Silkscreen Layer
Industry News | 2018-10-18 09:14:05.0
Lead-free processes propose new requirements on reflow soldering quality
Parts & Supplies | Pick and Place/Feeders
Many companies first applied SMT second-hand placement machines, and the selected placement machines were relatively stable, with low failure rate, easy maintenance, and important maintenance costs. Therefore, there are still many concerns about buyi
Parts & Supplies | Pick and Place/Feeders
Many companies first applied SMT second-hand placement machines, and the selected placement machines were relatively stable, with low failure rate, easy maintenance, and important maintenance costs. Therefore, there are still many concerns about buyi
Technical Library | 2024-06-23 22:03:59.0
The melting temperatures of most lead-free solder alloys are somewhat higher than that of eutectic Sn/Pb solder, and many of the alloys tend to wet typical contact pads less readily. This tends to narrow down the fluxing and mass reflow process windows for assembly onto typical organic substrates and may enhance requirements on placement accuracy. Flip chip assembly here poses some unique challenges. The small dimensions provide for particular sensitivities to wetting and solder joint collapse, and underfilling does not reduce the demands on the intermetallic bond strength. Rather, the need to underfill lead to additional concerns in terms of underfill process control and reliability. Relatively little can here be learned from work on regular SMT components, BGAs or CSPs.
Technical Library | 2007-11-15 15:54:44.0
At the contractor level once a product is required to be soldered with lead-free solders all the processes must be assessed as to insure the same quality a customer has been accustomed to with a Sn63Pb37 process is achieved. The reflow, wave soldering and hand assembly processes must all be optimized carefully to insure good joint formation as per the appropriate class of electronics with new solder alloys and often new fluxes.
PCB vacuum suction loader/SMT vacuum loader for loading bare board on PCB assembly line: https://www.ascen.ltd/Products/Automatic_SMT_equipment/PCB_loader/123.html ASCEN PCB vacuum loader we produced is mainly used for the beginning of the SMT produc
EKT AOI machine application: inspection after stencil printing, pre/post reflow oven, pre/post wave soldering?FPC etc. Stencil printing: Solder unavailability, insufficient or excessive solder, solder misalignment, bridging, stain, scratch etc. Compo
INSERT INTO tracking_express (userid, username, page_id, ts) VALUES ('#Quser_profile.id#', '#Quser_profile.username#', 29, (#ts#)) SMT Express, Volume 2, Issue No. 10 - from SMTnet.com Volume 2, Issue No. 10 Friday, October 20, 2000
| https://www.eptac.com/webinar/conformal-coating-and-solder-resist/
Q & A on Solder Resists and Conformal Coatings | EPTAC Skip to content Scroll Toll Free: 800.643.7822 Toggle navigation Training All Classes
| https://www.feedersupplier.com/sale-13240975-smt-multifunctional-5m-pixel-camera-3d-true-color-solder-paste-inspection-machine-smt-solder-paste-i.html
: Video Online Support Ship: 3-5days Package: Vacuum Packaging High Light: 5M Pixel camera SPI Machine , 3D True Color SPI Machine , Multifunctional Solder Paste Inspection Machine Product Description KOH YOUNG KY8030-3 SMT Solder Paste Inspection3D on-line SPI System SMT machine Name
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
