New Equipment | Solder Paste Stencils
EasyBraid’s stencil rolls are designed for use in SMT screen printing lines which keep stencil apertures clear of paste residues during the automatic screen printing process. They also clean the bottom of stencils, keeping them free from paste and fl
Quick Overview High Precision,With Vaccum Cups SP-400 is a high precision semi-automatic solder paste printing machine, printing accuracy can reach +/- 0.5mm. Can print PCB area as 50 x 50 mm to 400 x 400mm, single and double side PCB .PLC and touch
Electronics Forum | Fri Apr 11 06:22:04 EDT 2008 | andrzej
Hi Andrzej, > > We are using for BGA (0.8 pitch) > square apertures size 0.4 mm (rounded corners r = > t) and stencil thickness t=5 mils. So area > ration-_ w/4t=0.8 > > Regards Jan Hello Jan, I understand that you have the same pad dimensio
Electronics Forum | Fri Dec 06 13:00:29 EST 2002 | daanterstegge
I wouldn't recommend a metal squeegee, because if you can't wipe the step-etched area completely clean (that's the problem with metal) you'll have problems with the definition of the fine-pitch (it may stick in the holes). Best is a 70 Shore polyuret
Used SMT Equipment | Chipshooters / Chip Mounters
Samsung chip mounter SM-421 Advanced Flexible Mounter Using the vision system which is upgraded from the SM421 vision system, the SM421 can be applied to parts from 0603(0201) microchip to □22mm IC part through On-The-Fly reco
Used SMT Equipment | Chipshooters / Chip Mounters
Advanced Flexible Mounter Using the vision system which is upgraded from the SM421 vision system, the SM421 can be applied to parts from 0603(0201) microchip to 22mm IC part through On-The-Fly recognition. It also allows recognition of parts with
Industry News | 2018-10-18 11:08:03.0
Different Techniques for Plating
Industry News | 2013-01-02 16:01:34.0
A Convenienient and informative online tutorial about Design and Assembly Process Challenges for Bottom Terminations Components
Technical Library | 2015-12-31 15:19:28.0
Today's consumer electronic product are characterized by miniatuization, portability and light weight with high performance, especially for 3G mobile products. In the future more fine pitch CSPs (0.4mm) component will be required. However, the product reliability has been a big challenge with the fine pitch CSP. Firstly, the fine pitch CSPs are with smaller solder balls of 0.25mm diameter or even smaller. The small solder ball and pad size do weaken the solder connection and the adhesion of the pad and substrate, thus the pad will peel off easily from the PCB substrate. In addition, miniature solder joint reduce the strength during mechanical vibration, thermal shock, fatigue failure, etc. Secondly, applying sufficient solder paste evenly on the small pad of the CSP is difficult because stencil opening is only 0.25mm or less. This issue can be solved using the high end type of stencil such as Electroforming which will increase the cost.
Technical Library | 2015-08-25 13:51:27.0
The stencil printing process is one of the most critical processes in the electronic production. Due to the requirement: "faster and smaller" it is necessary to place components with different paste volume close together without regard to solder paste printing. In our days it is no longer possible to control the solder paste volume only by adjustment of the aperture dimensions. The requirements of solder paste volumes for specific components are realized by different thicknesses of metal sheets in one stencil with so called step stencils. The step-down stencil is required when it is desirable to print fine-pitch devices using a thinner stencil foil, but print other devices using a thicker stencil foil. The paper presents the innovative technology of step-up and step-down stencils in a laser cutting and laser welding process. The step-up/step-down stencil is a special development for the adjustment of solder paste quantity, fulfilling the needs of placement and soldering. This includes the laser cutting and laser welding process as well as the resulting stencil characteristics and the potential of the printing process.
http://www.ddmnovastar.com/stencil-printers - DDM Novastar Stencil Printers are designed for short to medium run PCB assembly. Ranging from manual to semi-automatic, these durable, easy-to-use systems provide repeatable, reliable results. Greatly r
http://www.ddmnovastar.com/stencil-printers - DDM Novastar Stencil Printers are designed for short to medium run PCB assembly. Ranging from manual to semi-automatic, these durable, easy-to-use systems provide repeatable, reliable results. Greatly r
Events Calendar | Mon Mar 18 00:00:00 EDT 2019 - Mon Mar 18 00:00:00 EDT 2019 | ,
Webinar: Stencil Design for Solder Paste, In Process Inspection & Process Defects
Career Center | , | Engineering,Production
Project Management, SMT Process Engineering
SMTnet Express, December 31, 2015, Subscribers: 23,946, Members: Companies: 14,865, Users: 39,660 Study on Solder Joint Reliability of Fine Pitch CSP Yong Hill Liang, Hank Mao, YongGang Yan, Jindong (King) Lee; AEG, Flex (Flextronics International
