.jpg)
pcb assembly,pcb manufacture,printed board pbc Industrial Control Interface Board PCBA GTA-002 Catalog:pcb, pcb assembly,pcb manufacture, printed circuit board, pcb supply, pcb boards, electrical.suppliers. Raw Material: FR4 Finish: ENIG/ OSP/ H
Electronics Forum | Mon Jun 25 11:33:20 EDT 2012 | davef
The immersion silver is an active surface and readily combines with sulfur from the environment. Silver sulfide tarnishes the surface and creates doubt about the integrity of the finish at inspection. [uyemura.com/library-4.htm] Your customer's boar
Electronics Forum | Thu Jan 17 14:52:17 EST 2008 | gnath
All, Can someone help find a source for purchasing interleaving/packaging paper for Immersion Silver boards (sulfur free + ph neutral ..). Thank you!
Industry News | 2014-09-18 17:55:32.0
SMTA China announcing that it presented awards for nine papers at the SMTA China South 2014 Conference Award Presentation Ceremony, held on Tuesday, August 26, 2014 at Shenzhen Convention & Exhibition Center in conjunction with the SMTA China Annual Award Ceremony.
Industry News | 2014-05-12 16:06:39.0
SMTA China announces that it presented awards for nine papers at the SMTA China East 2014 Conference Award Presentation Ceremony, held on Wednesday, April 23, 2014 at Shanghai World Expo Exhibition & Convention Center in conjunction with the SMTA China Annual Award Ceremony.
Technical Library | 2022-03-16 19:41:17.0
Creep corrosion occurs in electronics assemblies and it is reminiscent to electromigration but does not require electrical field to drive the reaction. Corrosive elements and moisture must be present for creep corrosion to occur. Sulfur is the most prominent element to cause creep corrosion in environments such as paper mills, rubber manufacturing, mining, cement manufacturing, waste water treatment etc., also including companies and locations nearby such industries. The main part of printed circuit board assembly (PCBA) to be affected is the PCB surface finish. Especially immersion silver is prone to creep corrosion, but it sometimes occurs in NiPd (lead frames), and to a lesser extent in ENIG and OSP surface finishes. As the use of immersion silver is increasing as PCB surface finish and electronics are more and more used in harsh environments, creep corrosion is a growing risk. In this paper we will present the driving forces and mechanisms as well as suitable tests and mitigation strategies against creep corrosion
Technical Library | 2018-05-09 22:15:29.0
Creep corrosion on printed circuit boards (PCBs) is the corrosion of copper metallization and the spreading of the copper corrosion products across the PCB surfaces to the extent that they may electrically short circuit neighboring features on the PCB. The iNEMI technical subcommittee on creep corrosion has developed a flowers-of-sulfur (FOS) based test that is sufficiently well developed for consideration as an industry standard qualification test for creep corrosion. This paper will address the important question of how relative humidity affects creep corrosion. A creep corrosion tendency that is inversely proportional to relative humidity may allow data center administrators to eliminate creep corrosion simply by controlling the relative humidity in the data center,thus, avoiding the high cost of gas-phase filtration of gaseous contamination. The creep corrosion relative humidity dependence will be studied using a modified version of the iNEMI FOS test chamber. The design modification allows the achievement of relative humidity as low as 15% in the presence of the chlorine-releasing bleach aqueous solution. The paper will report on the dependence of creep corrosion on humidity in the 15 to 80% relative humidity range by testing ENIG (gold on electroless nickel), ImAg (immersion silver) and OSP (organic surface preservative) finished PCBs, soldered with organic acid flux.
SMTnet Express, March 17, 2022, Subscribers: 25,805, Companies: 11,547, Users: 27,113 Creep Corrosion On Lead-Free Printed Circuit Boards In High Sulfur Environments The material and process changes required to eliminate lead from
| https://pcbasupplies.com/jm-20-sn60-pb40-0-5-mm/
% Flux type ROL0 Alloy composition (%) Sn 40Pb Halide content(%) 0.0 Silver chromate paper test No discoloration Solder spread factor
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/resources/solder-dictionary-of-terms
Solder Dictionary of Terms | Nordson EFD Search Arrow Black Arrow Right Arrow Youtube Twitter Facebook Paper Plane LinkedIn Zoom In Grid Envelope Earth Download File - Document 9 Boxes Browser Calendar Chart Click Icon Close
