Technical parameter: Model 1200 Printing area 1250×320mm Fixed printing position PCB Outer Or Pin Positioning Table trimming Front/Back±
New Equipment | Solder Materials
Ceasolder-PAL (Pink Acrylic Latex) Peelable Acrylic Latex Solder Mask Ceasolder-Pal is a temporary, peelable solder mask comprised of a thixotropic, synthetic acrylic latex designed to withstand fluxing, wave soldering and cleaning operations. Unli
Electronics Forum | Tue Feb 14 13:16:49 EST 2006 | Carol Stirling
CRITICAL DILEMA! Has anyone run into the problem described below and if so, what was the fix (besides not dealing with this Supplier)? Also, we do not have component manufacturing process experience. We are purchasing a surge resistor that function
Electronics Forum | Wed Sep 01 08:27:38 EDT 2004 | davef
Zinc from the brass [Cu3Zn2] diffuses into the tin causing solderability problems. Just 0.001% of Zn in your solder can render it fit for the scrap heap. So, you need a barrier plate between the brass and the tin. Copper or nickel-plating is commonl
Used SMT Equipment | SMT Equipment
mind vision camera, 0603 - more than 31 type components, 45 mm long connector (L100mm x W45mm) - - more than 45 type vision camera Substrate size: (limited to the host) : L460 x W440mm (Max) ~ L50 x W50mm (Min) Substrate thickness/substrate weight:
Used SMT Equipment | Pick and Place/Feeders
Product number: YS88 Products in detail The characteristics of Configurable ~ 0402 chip - 55 mmcomponents, the wide range of special-shaped long joint element The height of the object elementcorresponds to 25.5 mm 10 ~ 30 n can be easy to stick
Industry News | 2011-11-03 21:52:00.0
By davef: I was fortunate to be able to attend the SMTAI Exhibition Oct. 18-19, 2011. While I was walking around looking at the booths and talking to the exhibitors, I got this idea that I would report back on things that I found interesting. You know spread the news, since not everyone was there.
Industry News | 2018-12-08 03:29:29.0
SMT Dictionary – Surface Mount Technology Acronym and Abbreviation
Parts & Supplies | Air / Vaccuum
ORIGINAL SMT MACHINE PARTS JUKI 2080 EJECTOR SPARE SET 40084406 MC5M10HSV8S24B JUKI Nozzle Specifications: Brand Name JUKI EJECTOR Part Number 40084406 Model Number MC5M10HSV8S24B Ensure Tested buy juki Guarantee 1 month usage for machine
Parts & Supplies | Pick and Place/Feeders
90200-10J070 o-ring 90200-10J040 o-ring YV100X Vacuum Small Plate Sealing Ring Yamaha Maintenance seals Part name: O-RING, Maintenance seals, Vacuum Small Plate Sealing Part number: 90200-10J070 90200-10J040 Machine model: YV100X Other Yamaha
Technical Library | 2020-08-27 01:22:45.0
Initially adopted internal specifications for acceptance of printed circuit boards (PCBs) used for wire bonding was that there were no nodules or scratches allowed on the wirebond pads when inspected under 20X magnification. The nodules and scratches were not defined by measurable dimensions and were considered to be unacceptable if there was any sign of a visual blemish on wire-bondable features. Analysis of the yield at a PCB manufacturer monitored monthly for over two years indicated that the target yield could not be achieved, and the main reasons for yield loss were due to nodules and scratches on the wirebonding pads. The PCB manufacturer attempted to eliminate nodules and scratches. First, a light-scrubbing step was added after electroless copper plating to remove any co-deposited fine particles that acted as a seed for nodules at the time of copper plating. Then, the electrolytic copper plating tank was emptied, fully cleaned, and filtered to eliminate the possibility of co-deposited particles in the electroplating process. Both actions greatly reduced the density of the nodules but did not fully eliminate them. Even though there was only one nodule on any wire-bonding pad, the board was still considered a reject. To reduce scratches on wirebonding pads, the PCB manufacturer utilized foam trays after routing the boards so that they did not make direct contact with other boards. This action significantly reduced the scratches on wire-bonding pads, even though some isolated scratches still appeared from time to time, which caused the boards to be rejected. Even with these significant improvements, the target yield remained unachievable. Another approach was then taken to consider if wire bonding could be successfully performed over nodules and scratches and if there was a dimensional threshold where wire bonding could be successful. A gold ball bonding process called either stand-off-stitch bonding (SSB) or ball-stitch-on-ball bonding (BSOB) was used to determine the effects of nodules and scratches on wire bonds. The dimension of nodules, including height, and the size of scratches, including width, were measured before wire bonding. Wire bonding was then performed directly on various sizes of nodules and scratches on the bonding pad, and the evaluation of wire bonds was conducted using wire pull tests before and after reliability testing. Based on the results of the wire-bonding evaluation, the internal specification for nodules and scratches for wirebondable PCBs was modified to allow nodules and scratches with a certain height and a width limitation compared to initially adopted internal specifications of no nodules and no scratches. Such an approach resulted in improved yield at the PCB manufacturer.
Camera Module Cleaning Machine ETA-C800 If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products. PCBA Cleaning Machine, On-line PCBA Cleaning Machine
https://www.ascen.ltd/Products/Solder_paste_printer/513.html full auto PCB screen printer and SMT solder paste printing machine with Image and optical system,It is a very accurate fully automatic SMT stencil printer.automatic PCB screen printer main
Training Courses | | | IPC-A-610 Trainer (CIT)
The Certified IPC-A-610 Trainer (CIT) courses recognize individuals as qualified trainers in the area of quality assurance of electrical and electronic assemblies and prepares them to deliver Certified IPC-A-610 (CIS) training.
Training Courses | | | IPC-A-610 Trainer (CIT)
The Certified IPC-A-610 Trainer (CIT) courses recognize individuals as qualified trainers in the area of quality assurance of electrical and electronic assemblies and prepares them to deliver Certified IPC-A-610 (CIS) training.