Industry Directory | Distributor / Manufacturer / Manufacturer's Representative
North American Distributor for GEN3 Systems Ltd.test equipment and reliability products, and Inspectis HD Camera inspection tools.
2.0 Cmk @ ± 25 μmProduct description: DEK E Seriels SMT Stencil Printer E by DEK, core cycle time: 8 seconds, Substrate size: 620 mm (X) x 508.5 mm (Y), System alignment capability: > 2.0 Cmk @ ± 25 μm DEK E SMT Stencil Printer DEK E SMT Stenc
2,0 Cpk @ ±17,5 μmDemision:1300mm×1000mm×1600mmProduct description: ASM DEK TQ SMT Stencil Printer, Max PCB: 400x400 mm, Core cycle time：5 secs, Demision:1300mm×1000mm×1600mm, Wet print capability > 2,0 Cpk @ ±17,5 μm ASM DEK TQ SMT Stencil Prin
Electronics Forum | Fri Apr 07 17:17:55 EDT 2000 | Dave F
Ashok: You should select and use low residue tapes. But ya know, ya go out and research a great tape and if yer not careful, the buyer will second source ya and (surprise) ya got residues again. We have found that Lemme say this about Katon tape
Electronics Forum | Sat Jan 04 09:48:22 EST 2003 | Steve
Yes this is 1st generation, a large metal tube positioned horiz. with valves to wet the wiping towel all at once. We have the newer sys. on the other Ekra, motor driven gear rack and selonoid dispenser.I talked w/ their tech. and got "Oh yea,,they al
Used SMT Equipment | Screen Printers
DEK Horizon 03iX Fully Automatic Screen Solder Paste Printer Model Horizon 03iX Operating System Win XP+09sp13 or up PCB support Tooling&n
Used SMT Equipment | Screen Printers
DEK Horizon 03iX SMT Printer Model Horizon 03iX Operating System Win XP+09sp13 or up PCB support Tooling Magnetic tooling pins Camera type Hawkeye 750 or Hawkeye 1700 (optional) 198040 198043 hawkeye Board foil clamp siz
Industry News | 2018-08-09 12:24:23.0
Seika Machinery is pleased to announce that it carries six new process control devices from MALCOM and UNITECH. These include: SPS series paste mixers, viscometers, wetting balance testers, profilers / camera systems, reflow simulators and PCB board cleaners.
Industry News | 2003-04-09 09:52:16.0
Speedprint Technology is delighted to announce the release of a new inline stencil printer, the SP880avi
Parts & Supplies | Board Cleaners
1.100% polyester double knit. 2. Very high dry /wet strength and widely used in electronic industry. 3. All of our products have been selected for quality and cost effectiveness Specification:6"ⅹ6" Packing:150PCS/bag
Parts & Supplies | Pick and Place/Feeders
JUKI E93307000A0 TRANSPORT SENSOR CABLE 2 ASM www.fujintai.com JUKI E93307150A0 Z AXIS DEDUCTION SENSOR ASM. FUJINTAI TECHNOLOGY CO.,LTD JUKI E93307170A0 X MOTOR ASM www.fujintai.com JUKI E93307250A0 MOTOR ENCODER CABLE ASM. FUJINTAI TECHNOLOGY CO
Technical Library | 2022-10-11 17:27:08.0
Lead-free flux technology for electronic industry is mainly driven by high soldering temperature, high alloy surface tension, miniaturization, air soldering due to low cost consideration, and environmental concern. Accordingly, the flux features desired included high thermal stability, high resistance against burn-off, high oxidation resistance, high oxygen barrier capability, low surface tension, high fluxing capacity, slow wetting, low moisture pickup, high hot viscosity, and halogen-free. For each of the features listed above, corresponding desired chemical structures can be deduced, and the impact of those structures on flux residue cleanability can be speculated. Overall, lead-free flux technology results in a greater difficulty in cleaning. Cleaner with a better matching solvency for the residue as well as a higher cleaning temperature or agitation are needed. Alkaline and polar cleaner are often needed to deal with the larger quantity of fluxing products. Reactive cleaner is also desired to address the side reaction products such as crosslinked residue.
Technical Library | 2019-05-21 00:21:26.0
Continue to talk about the dust removal from temperature humidity test chamber. Cleaning and maintenance: 1) Pls remove internal impurities inisde chamber before operation. 2) The power distribution room should be cleaned at least once a year, and the dust can be removed by vacuum cleaner. 3) The exterior chamber must also be cleaned more than once a year, which can be wiped with soapy water. Inspection and maintenance of humidifier: The water storage in humidifier should be replaced once a month to ensure clean water quality, humidifying water tray should be cleaned once a month to ensure smooth flow of water. The inspection of over-temperature protector:during the test: If the temperature is over 20 ℃ ~ 30 ℃ than the maximum value setted,the power supply of the heater will stop, the "OVERHEAT" overt-emperature warning light will automatically turn on but the fan is still in operation, if the equipment runs without operator around,the operator should check the over-temperature protector in advance to ensure wether it has been setted properly before start [wet ball over-temperature protector set to 120 ℃].
Electrovert's DwellFlex 4.0 is the first solder nozzle designed specifically with Industry 4.0 automation in mind. The patent pending design enables the length of the wave to be adjusted on-the-fly as variable board types are run through the wave.
SMTnet Express, November 19, 2017, Subscribers: 30,938, Companies: 10,768, Users: 23,942 To Quantify a Wetting Balance Curve Frank Xu Ph.D., Robert Farrell, Rita Mohanty Ph.D.; Enthone Wetting balance testing has been an industry standard
Lewis & Clark | http://www.lewis-clark.com/product-tag/cleaner/
Cleaner Archives - Lewis and Clark Skip to content My Cart: 0 View Cart Checkout No products in the cart. Subtotal: View Cart Checkout Lewis and Clark We Discover Equipment Opportunities NH: 603-594-4229 FL: 813-888-7436 sales@lewis
ASCEN Technology | https://www.ascen.ltd/Products/Solder_paste_printer/394.html
(including the rugged Mark points),applicable for tin plating, coppering,gold plating,FPC and other types of PCB with different colors. 3. Cleaning system:dry cleaning,wet cleaning,vacuum,which can be combined to use cleaning system, a new type of wipes to ensure full contact with the steel mesh, increase the type of vacuum suction to ensure the
winsouce.jpg)
.gif)
