Industry Directory | Distributor
Z-Mar Technology can provide virtually any product or service imaginable to ensure proper static control practices. Our goal is to assist you in improving quality and production.
Industry Directory | Distributor
Shenzhen Ezkey Electronics Co., Ltd. is a leading company in the field of electronic components distributors and a professional IOT solution partner.It devotes itself to work for EMS, OEM, ODM and IDH manufacturers.
Affordable Manufacturing Execution System (MES), Shop Floor Automation and Integration Software CELLS WORKFLOW Product Tracking MES is an affordable full Manufacturing Process Control Software System providing Plant Intelligence for any industry.
The FKN Systek S200 is a semiautomatic diamond blade depaneling saw which will cut a populated PCB panel one line at a time. The operator places the panel onto the input tray and positions the cutting line over the blade travel path. Pushing the sta
Electronics Forum | Sat Jan 13 19:34:16 EST 2007 | geb
(Its a flex head) I have made a trial program to determine at what point it stops. This is how it goes: I load the program, push the start button it will zero and pick components with head 1. As soon as it finishes placing head 1 parts it halts wher
Electronics Forum | Thu Aug 18 11:38:34 EDT 2011 | johndoe0222
I got this error message on the fuji IP3: " Servo limit over. Servo Z1 Axis +" I was wondering how to fix this error. Thanks.
Used SMT Equipment | Soldering - Selective
Make: Nordson ACE Model: KISS 103ILDP Description: This is Dual Pot Inline selective soldering system, with two selective soldering machines, tied together that can be run independently OR as a single inline selective system. This syste
Used SMT Equipment | X-Ray Inspection
CR Technology Model Number: CRX2000 Serial Number: 1S1878.0100 Year 2000-2001 Hamamatsu Tube Type -130kV X-Y-Z indexing table with joystick control 18" x 24" X-Y travel Full 360 degrees rotation and tilt up to 90 degrees BGA / Flip Chip Sold
Industry News | 2022-10-04 11:37:37.0
MIRTEC is pleased to announce plans to exhibit at SMTA International, scheduled to take place Nov 2-3, 2022 at the Minneapolis Convention Center in Minnesota. The MIRTEC team is looking forward to meeting with attendees at booth #906 for a detailed demonstration of its MV-6Z OMNI 3D In-Line AOI system.
Industry News | 2021-10-04 13:48:55.0
MIRTEC is pleased to announce their plans to exhibit at the SMTA International Exposition, scheduled to take place Nov. 3-4, 2021, at the Minneapolis Convention Center in Minneapolis, MN. The MIRTEC team is looking forward to meeting with attendees at booth #3500 for a detailed demonstration of its MV-6Z OMNI 3D In-Line AOI system.
Parts & Supplies | Pick and Place/Feeders
90990-08J024 YAMAHA Nozzle Screw 9498 396 01091 Valve KGS-M7176-00x 19 9498 396 01092 Cover KHG-M130A-00x 1 9498 396 01097 up/down cylinder KGS-M9904-01x 2 9498 396 01098 Valve assy KGS-M9917-A0x 1 9498 396 01249 Air cylinder assy KGR-M9612-00x
Parts & Supplies | Assembly Accessories
Main switch 3-phase + N 9498 396 02415 Networking Switch 9498 396 03129 Limit switch ZC-D55 Meanwell Switching power supply NES-15-24 Magnetic switch DX-20R DX-20R Magnetic switch DX-11R DX-11R
Technical Library | 2019-05-15 22:26:02.0
As the demand for higher routing density and transfer speed increases, Via-In-Pad Plated Over (VIPPO) has become more common on high-end telecommunications products. The interactions of VIPPO with other features used on a PCB such as the traditional dog-bone pad design could induce solder joints to separate during the second and thereafter reflows. The failure has been successfully reproduced, and the typical failure signature of a joint separation has been summarized.To better understand the solder separation mechanism, this study focuses on designing a test vehicle to address the following three perspectives: PCB material properties, specifically the Z-direction or out-of-plane Coefficient of Thermal Expansion (CTE); PCB thickness and back drill depth; and quantification of the driving force magnitude beyond which the separation is due to occur.
Technical Library | 2022-10-31 17:25:37.0
Mixed formulation solder alloys refer to specific combinations of Sn-37Pb and SAC305 (96.5Sn–3.0Ag–0.5Cu). They present a solution for the interim period before Pb-free electronic assemblies are universally accepted. In this work, the surfaces of mixed formulation solder alloys have been studied by in situ and real-time Auger electron spectroscopy as a function of temperature as the alloys are raised above the melting point. With increasing temperature, there is a growing fraction of low-level, bulk contaminants that segregate to the alloy surfaces. In particular, the amount of surface C is nearly _50–60 at. % C at the melting point. The segregating impurities inhibit solderability by providing a blocking layer to reaction between the alloy and substrate. A similar phenomenon has been observed over a wide range of (SAC and non-SAC) alloys synthesized by a variety of techniques. That solder alloy surfaces at melting have a radically different composition from the bulk uncovers a key variable that helps to explain the wide variability in contact angles reported in previous studies of wetting and adhesion. VC 2011 American Vacuum Society. [DOI: 10.1116/1.3584821]
http://www.gpd-global.com No drip no drool across a wide range of fluid viscosities (low-to-mid and low-to-high). No manual adjustment to compensate for pump variability. Truly Volumetric PCD Pumps for total control of dispensing fluids. Ability to
www.unisoft-cim.com/cells.html - CELLS WORKFLOW is affordable, simple to setup & use yet powerful product & job tracking software for fast New Product Introduction (NPI). The CELLS WORKFLOW software provides total traceability in manufacturing floor
Training Courses | | | IPC J-STD-001 Space Specialist (CIS)
The J-STD-001 Space Addendum is an additional optional module for the Certified IPC J-STD-001 CIS (Specialist) program for organizations that are required to meet these additional requirements.
Training Courses | | | IPC J-STD-001 Space Trainer (CIT)
The IPC J-STD-001 Space Addendum (CIT) certification courses allow individuals to conduct Certified IPC J-STD-001 Space Addendum Specialist (CIS) training.
Events Calendar | Wed Mar 13 00:00:00 EDT 2024 - Wed Mar 13 00:00:00 EDT 2024 | ,
Wine Down Wednesday: A Texpat Down Under- The Good, the Quirky, & the Utterly Ridiculous
Events Calendar | Tue May 17 00:00:00 EDT 2022 - Thu May 19 00:00:00 EDT 2022 | Amsterdam, Netherlands
Electronics in Harsh Environments Conference and Exhibition
Career Center | Tampa, Florida USA | Engineering,Production
Reptron Manufacturing Services located in Tampa, Florida needs an additional TEST ENGINEER for our electronics manufacturing facility. MUST have at least three years' of RECENT experience as a Test Engineer in an electronics manufacturing environmen
Career Center | Irvine, California USA | Engineering,Technical Support
Act as a response center engineer to work with customers of Tecnomatix-Unicam products. Resolve problems over the telephone or on site as necessary. Travel to customer sites is required. Act as a local expert for Tecnomatix-Unicam product lines. Conf
Career Center | , District of Columbia | Engineering,Management,Production,Sales/Marketing
• Strong technical leadership and decision-making skills; strong verbal and written communication skills to provide clear, crisp direction for key issue resolution; and good team skills to facilitate cross-functional cross -site team effectiveness.
Career Center | Toronto, Ontario Canada | Production,Quality Control,Technical Support
HIGHLIGHTS OF QUALIFICATIONS • Over 5 years of experience working as a Technical Support person, Onsite Technician in maintenance and operation of business environment to support business such as inventory of equipments and supplies as well as softw
increases, Via-In-Pad Plated Over (VIPPO) has b
SMT Express, Issue No. 1 - from SMTnet.com Volume 1, Issue No. 1 Thursday, June 3, 1999 Tricks of the Trade Optimizing Time/Pressure Dispensing ofAdhesives by Chrys Shea Return to Previous Page Over the past
Heller Industries Inc. | https://hellerindustries.com/parts/586544/
586544 - Latch Strap Gen -V, E-Z Open Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New
| https://ipcapexexpo.org/travel/location-parking
. Parking rates are set by ACE Parking, IPC has no control over these rates and can range from $15-$35 depending on the time of year and activity taking place in the convention center