New Equipment | Curing Equipment
EXFO offers a full line of UV/Visible Spot Curing Systems to meet any precision assembly challenge. EXFO's new OmniCure� Platform offers customers a choice between 100W and 200W lamp systems. EXFOs OmniCure� Series 2000 is simple to use, while provid
New Equipment | Curing Equipment
This is a portable UV curing system with a curing width of 6". The PortaRay 400 offers up to 72 square inches of curing area and is equipped with an integrated cooling system which provides power to a 400 Watt, 2 inch 200 watt/inch active lamp.
New Equipment | Curing Equipment
Flexible - Multi-wave-length Arc-lamps cures most coatings and glues without the need of changing lamps. Compact - Overall length of only 1600 mm, including -Inspection module -Dual Arc lamp ramps and cooling zone. Energy efficient - Energy consump
Flexible light guides permit strongly localised irradiation. Quick curing of selective sticking and controlling of polymerisation processes is possible using such UV-plants. Different versions of our UV-light-source for high intensive UV irradiation
Specifically engineered for water resistance on printed circuit board protection and LED component protection in membrane switches. Surface Resistivity: 3.8 x 1014 ω/■ Insulation resistance of cured films of UV-3010 at 100°C and 95% relative h
For encapsulation of wirebonded IC’s Zymet's glob top and dam-and-fill encapsulants are UV curable, yet they have properties similar to conventional heat cured encapsulants, high Tg’s and low CTE’s. With UV cure, curing is performed quickly, inline
Lite Fast 2081, a UV encapsulant, was specifically developed to relieve the stress placed on toroidal coils or electronic components that will experience pressure during the molding process. With a durometer Shore D hardness of 5, the UV encapsulant
Henkel’s line of Loctite Hysol® and Loctite Eccobond™ encapsulants are primarily used to ensure environmental protection and boost the mechanical strength of wire bonded devices. They are developed to provide protection to wire bonds, leads and alumi
Lite Fast A-1115-M is a clear UV coating with excellent adhesion to polyester, polycarbonate, polyurethane and many other plastics and cures within seconds. There are two particular functions where this UV adhesive is most frequently used, as a re
The instrument can be applied for control of the radiation profile in UV-dryer channels. The integrated sensor is available for different spectral ranges (UVA, UVB, UVC). Due to the flat housing the measuring device can be directly applied in the dry
