New Equipment | Rework & Repair Equipment
BEST HotDots™ are designed to simply and cleanly attach jumper wires on a board. HotDots™ are built to survive at high temperature as both the adhesive and the polyimide material are designed to withstand wash and reflow temperatures. HotDots™ are a
New Equipment | Fabrication Services
Minimum line width/space: 5mils Surface finish: OSP Board thickness: 1.60MM Minimum drilled hole diameter: 10mils Copper thickness: 0.5oz
1) Single Sided PCB 2) Material ranges: FR-1, 94VO/HB, 22nf, CEM-1 and CEM-3, FR-4 3) Copper weight: 1-2 oz 4) Profile: Punch 5) Thickness: 0.8mm-1.6mm 6) Surface finish: OSP, HASL, Immersion Gold
1~26 layers, High Mix low volume to Mass production. FR4-Tg140~200. Surface finish OSP, Immersion gold, Immersion silver, Immersion tin, Hard gold plating etc. Finish copper up to 6oz. HDI 2+N+2 Capability.
New Equipment | Cable & Wire Harness Equipment
Internal wiring of Appliances or electronic equipment’s where exposed to temperature not exceeding 105℃. Product Specification : Conductor material of Tinned or Bare copper Rated temperature 105°C Rated Voltage 600 V (Spark voltage 6000 V) Fl
New Equipment | Cable & Wire Harness Equipment
Internal wiring of Electric equipments. or where exposed to oil at a temperature not exceeding 105 ℃ Product Specification : Conductor material of Tinned or Bare copper Rated temperature 105 ℃ Rated Voltage 600 V (Spark voltage 6000 V) Flame
General specification for Microwave/RF PCB Layer count: 1-6 Board thickness: 0.2-3.2mm Copper thickness: 0.5-4oz Dielectric Constant(DK): 2.2-10.3 Min trace width/spacing: 4/4mil Min drill hole size: 0.2mm Surface treatment: HAL(Lead free), I
High-density interconnection/HDI PCB Layer: 8 (HDI) Structure: 2+4+2 with stack via Material: FR4(Tg170) Thiness: 1.0mm Surface treatment: Selective immersion gold + OSP Blind via L1-2 & L2-3 & L6-7 & L7-8: 0.1MM (4mil) Buried via L3-6:
.jpg)
Layer Count: 8L Board Thickness: 1.0mm Panel Dimension:190*86mm/2up Material: S1141 Copper on board surface: 35μm Min Hole Diameter: 0.1mm Min line Width/Space: 8/8mil Surface Finish: ENIG+Selective OSP in BGA area This quick turn PCB is manufacture
Layer: 8 layers Material: FR-4 Board Thickness: 0.6mm Surface Finish: Immersion Gold 1~4u Copper Thickness: 1/3 oz Impedance, 4/4mils width/spacing Layers: 2--36layers Max manufacturing size: 640mm*1100mm Copper foil thickness: 0.5OZ-13OZ M
winsouce.jpg)
