Electronics Forum: *fuji cp6 manual* (Page 1 of 53)

cp6

Electronics Forum | Tue Sep 01 12:20:47 EDT 2009 | fujiphil

Manually load the board and activate the solenoid for table up/down. Goto I/O then check the status of the sensor. if the sensor was tripped when table is down, removed the pin and check for foreign objects. Or check the hole of the pcb, maybe the si

Fuji cp6 re-reading fiducials

Electronics Forum | Thu Jul 21 01:29:07 EDT 2005 | matjen

We are using Fuji-Flexa software and we are not sure where to go in the software to check the proper data. If anyone has Fuji-Flexa software and could direct us in the right direction please let me know. Thanks.

Fuji cp6 placement issues

Electronics Forum | Wed Jun 10 10:38:51 EDT 2015 | cyber_wolf

The published Fuji CP6 placing accuracy specification is plus/minus .1mm I would say that your machine is running just fine.

Fuji cp6 nozzle repair

Electronics Forum | Wed Jun 29 09:05:38 EDT 2005 | jdengler

Try http://www.smtresearch.com/ But the price is not much cheaper than new ones.

Fuji cp6 nozzle repair

Electronics Forum | Wed Jun 29 19:25:02 EDT 2005 | matjen

I found a place that exchanges old nozzles for new ones; thanks for the inputs though.

Fuji cp6 nozzle repair

Electronics Forum | Thu Jun 30 10:11:47 EDT 2005 | Stefan

Here is another one: http://www.cotinc.com/product_range.htm

Fuji cp6 placement issues

Electronics Forum | Thu Jun 11 07:26:20 EDT 2015 | linux

Think you right, not enough to be worried about. Thanks for all your help.

Fuji cp6 nozzle repair

Electronics Forum | Tue Jun 28 19:56:20 EDT 2005 | matjen

I am in the process of searching for anyone that does repair on fuji cp6 nozzles .7 & 1.0 mainly, We have an abundance of bent and broken nozzles that I would like to get repaired rather than throwing out so if anyone has information on this please

Fuji cp6 placement issues

Electronics Forum | Sun Jun 07 19:16:54 EDT 2015 | linux

Hello everyone, I'm looking for help with placement issue on our cp6 Fuji. On occasion we have to adjust co ordinates on the x and y axis usually about 0.12mm. Ball screw was replaced did not fix issue. Anything else we could try. Thanks everyone

Fuji cp6 nozzle repair

Electronics Forum | Wed Jun 29 03:47:12 EDT 2005 | fastek

I'm confused. Aren't Fuji nozzles like $20 each? Why bother? I would hope you understand that a nozzle not properly repaired could cause $50 worth of rework in about a minute after you installed it. Stepping over dimes to pick up pennies comes to min

  1 2 3 4 5 6 7 8 9 10 Next

*fuji cp6 manual* searches for Companies, Equipment, Machines, Suppliers & Information

Void Free Reflow Soldering

Training online, at your facility, or at one of our worldwide training centers"
2024 Eptac IPC Certification Training Schedule

We offer SMT Nozzles, feeders and spare parts globally. Find out more
2024 Eptac IPC Certification Training Schedule

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
High Throughput Reflow Oven

World's Best Reflow Oven Customizable for Unique Applications


Internet marketing services for manufacturing companies