Electronics Forum | Sat Apr 23 00:21:10 EDT 2011 | azrina
As am doing screening right now, am not measuring the total cleanliness yet, i just observe by taking photos (FYI, am varying speed for conveyor belt for cleaning) and see whether the flux is able to be removed by certain parameters. the speed am usi
Electronics Forum | Wed Sep 18 15:13:17 EDT 2002 | davef
Effects of Gold (Au) on Solder Properties Concentration Range in Weight Percentage w/o Au in Sn63/Pb37 Solder [A Sugarman/Loranger] * 2.0 - 3.0% Spreadability and fluidity of solder reduced (1) * 3.0% Highest acceptable concentration of Au in solder
Electronics Forum | Tue Jul 13 13:37:23 EDT 2010 | pjc
That's cold compared with this specification from a leading oven mfr.: Flow Rate - 1.0 - 3.0 US gal/min (3.79 - 11.4 l/ min) • Inlet size and pressure - 0.5 in. male NPT; 310 - 483 kPA (45 - 70 psi) • Pressure drop - 200 kPa @ 11.4 l/min (30 psi @ 3
Electronics Forum | Fri Jun 23 10:48:44 EDT 2006 | Rob
Hi Paul, Can't find any info on Cobalt 995,but we do have experience of 99/0.7/0.3 +0.02% Cobalt wire - flows better than any leadfree wire we've come across & the cobalt is supposed to improve tip life. Bit smokey though, but with extraction that'
Electronics Forum | Tue Nov 07 10:25:19 EST 2000 | Thomas Ballhausen
Thank you for your kind contribution and efforts in helping me. I just found out we have been talking different units; my microns were micro meter ...? So, let me get things right now: the substrate supplier confirmed the following data: Cu foil +
Electronics Forum | Thu Dec 08 07:55:16 EST 2005 | davef
Your understanding of the situation is correct. In both cases, you solder to the nickel. The gold [Au] protects the nickel from oxidation. When soldering, the gold moves into solution in the solder and forms an intermetallic compound [IMC] with th
Electronics Forum | Thu Oct 02 21:00:26 EDT 2003 | davef
Who says the chlorine comes from your tap water? Our PTOW dumps boat loads of chlorine into our water periodically. Sometimes it's so bad you can smell it. We doubt that it is the source of your problem. This chlorine will volitize very quickly,
Electronics Forum | Wed Sep 13 20:04:37 EDT 2006 | mika
Hi, We have a customer that want us to produce a single sided 0.4 x 100 x 50 mm size RoHS pcba approx 1000 of them. The board only contains three 2.54mm pitch Non P.I.P, SMT-connectors. We have never produced such a thin pcb:s before. We are thinkin
Electronics Forum | Mon Sep 27 08:52:11 EDT 1999 | Brian
| i had a problem here, during the wave soldering process, we apply a water soluble mask on the gold finger to protect it from contamination. But after washing, there is still some mask left on the gold finger. | Can anyone pls advise is there any pa
| 1 |
winsouce.jpg)
