Electronics Forum | Thu Nov 14 10:52:56 EST 2019 | jandon
Maybe something like this could work?
Electronics Forum | Tue Nov 12 00:49:37 EST 2019 | myke03o
I am optimizing a stencil opening for BGA with 0.4mm pitch and pad diameter of 0.2mm. Can anyone advice of stencil thickness and stencil opening I can use in order to have a good paste release. Thanks for all your answers.
Electronics Forum | Thu Nov 14 18:25:07 EST 2019 | myke03o
Hi Jandon, Thanks, I will try it on my DOE.
Electronics Forum | Thu Nov 14 21:47:41 EST 2019 | sssamw
Yes, 0.25x0.25 square could work @0.1 thickness, use nano-coating or electroform stencil for better solder paste release.
Electronics Forum | Thu Nov 14 22:24:43 EST 2019 | dman97
Use a type 5 solder for maximum paste release.
Electronics Forum | Tue Apr 28 21:48:50 EDT 2009 | davef
Confirm the source of the issue. Run a coalescence test on both lots of paste. A simple coalescence test can quickly determine the condition of solder paste after prolonged use. Simply print a small disk [around 4-5mm diameter and 0.2mm thick - a bu
Electronics Forum | Thu Nov 30 21:13:55 EST 2000 | Dave F
Can't find "WS601" on the Alpha site. What is that stuff? So, with nothing to go on, I'll just guess ... Yer probably cold welding the solder particles together. The nozzle size (inside diameter) determines the dot size. * With glue, small dot si
Electronics Forum | Sun Jan 18 09:20:26 EST 2009 | davef
We're not sure of the condition of your solder paste. So, afte 24 hours, if it's: * Unused, in a reclosed container, maybe a week of life depending on the environment * Used, scrap A simple coalescence test can quickly determine the condition of sol
Electronics Forum | Wed Mar 29 03:40:06 EST 2006 | Frank
The Juki 2060 can have both front and rear trolleys and you do not loose any feeder locations. My question was why can't the Assembleon put trolley on the rear? I recently visited a friend at a company that used a lot of Assembleon and compared run
Electronics Forum | Tue Aug 01 11:23:56 EDT 2017 | OrHorti
We are using a custom made nozzle, designed for this particular LED. The dome of the LED is also custom made, the diameter of the lens at the base is 2.9mm while the substrate of the package is 3.3mm, so this gives about 0.2mm spacing between lens a
winsouce.jpg)