Electronics Forum | Fri May 25 03:28:20 EDT 2007 | shparekh
Hi All, Brand new here. I am wondering if I can find a breakout board for 0.4mm pitch SMD connectors. TIA. -sanjay
Electronics Forum | Tue Jan 30 07:55:31 EST 2001 | ibi
I will have to process a PQFP 128 with a pitch of 0.4 mm. Given that the width of its leads are about 0.13-0.23 mm, i dread the worst when printing the solder paste. So, i would like to know if some people have yet test this type of fine pitch, what
Electronics Forum | Tue Jan 30 15:30:17 EST 2001 | dason_c
Please check what is the actual pitch size. I found some of the designer use 15.7 mil pitch and no accumulate ie 15.7, 15.7 and 15.8...... Also, I recommended the pad width should be 10 - 11 mil for 0.4mm pitch. You can open the 10 - 10.5 mil aper
Electronics Forum | Mon Nov 01 10:29:13 EDT 2010 | scottp
I've searched the archives and maybe my search skills aren't up to snuff but I couldn't find much. I'm curious what people are doing for 0.4 mm pitch BGAs, assuming a type 4 paste. Pad diameter? SMD or NSMD? Stencil thickness? Aperture diameter? Us
Electronics Forum | Sat Feb 10 18:33:52 EST 2001 | arturoflores
check the archives (keyword="16 mil pitch") and also consider 45 degree pattern printing. Regards.
Electronics Forum | Fri May 25 08:11:22 EDT 2007 | davef
Welcome. Look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=28950
Electronics Forum | Tue Jan 30 21:14:26 EST 2001 | davef
Suggestions are: * Limit pad width to 0.008" [0.2mm] * Use IPC-7525 Stencil Design Guidelines * Avoid Type 4 pastes, if you can * Slow down your print head to 0.63"/sec [16 mm/sec] * Consider the suggestions on printing by rpereira in the past
Electronics Forum | Sat Feb 10 17:12:03 EST 2001 | rpereira
I admit, 16 mil QFP printing is very challenging but if all your control factors (print speed, etc...) are setup correctly (through DOE) extremely high yields can be achieved and more importantly a repeatable and robust product will be manufactured.
Electronics Forum | Mon Dec 18 21:17:41 EST 2006 | davef
Use the IPC calculator [free at http://www.ipc.org]
Electronics Forum | Thu Dec 14 22:28:38 EST 2006 | Tony
Hi, where can I find info about how to make the pad design to work for VSSOP48 0.4 mm Pitch & TSSOP56 0.5 mm pitch components? I should also mention that we are working in a project that this 14 layers High-Frequency RoHS board is included. The pad c
winsouce.jpg)