Electronics Forum | Wed Mar 01 17:18:19 EST 2000 | Eldon Sanders
That size should have been .375 X .25 X .050 thick.
Electronics Forum | Wed Mar 01 17:18:19 EST 2000 | Eldon Sanders
That size should have been .375 X .25 X .050 thick.
Electronics Forum | Wed Feb 03 17:39:41 EST 1999 | Rich Croteau
Name of equipment that automatically does the solderballing. Pads are .010" on .050" pitch
Electronics Forum | Fri Sep 11 16:52:00 EDT 1998 | Dave F
0.050" -> 50 mil -> 50 pitch 0.80 mm -> 0.032" -> 32 mil -> 32 pitch 0.64 mm -> 0.025" -> 25 mil -> 25 pitch 0.50 mm -> 0.020" -> 20 mil -> 20 pitch 0.40 mm -> 0.016" -> 16 mil -> 16 pitch 0.20 mm -> 0.012" -> 12 mil -> 12 pitch Dave F
Electronics Forum | Fri Apr 27 08:19:04 EDT 2012 | jim_n_hky
Can anyone offer guidelines on DFM and process recommendations for soldering .050" pitch connectors in the wave. The initail design had .026" drill with .043" pads so only .007" between pads. I requested .035" pads, but this still only leaves .015" b
Electronics Forum | Thu Jan 03 08:02:53 EST 2002 | davef
Slump is a function of the particular paste you select and the temperature of the paste. Use a slump test like the one that follows to compare fluxes. Slump Test Step Process activity 1 Print paste on white ceramic substrate or microscope sli
Electronics Forum | Wed Oct 25 13:42:32 EDT 2000 | Chris McDonald
I was wondering IF anybody has has success wave soldering a 50 (2 rows of 25) pin 0.050" pitch thru-hole connector. I seem to be getting alot of bridging no matter what I do. Is there a design spec for the size and shape of pads? The pads on the pcb
Electronics Forum | Wed Jul 13 19:47:06 EDT 2005 | Darby
This works for me with ENIG finish and a SAC305 NC paste Reduce all pads by -2mil on all sides ie 0.050" x 0.050" becomes 0.046" x 0.046" EXCEPT Anything smaller than 30mil; -1.5mil Anything smaller than 20mil; -1mil Anything smaller than 15mil;
Electronics Forum | Fri May 18 14:54:57 EDT 2007 | realchunks
Hi Ed, It all depends on your BGA, your placement eqmt, your inspection method and your rework station. I would keep pasrts 0.050" away fromt eh part if possble. I would X-Ray inspect the part, so parts being close really wouldn't be a factor. Fo
Electronics Forum | Fri Oct 27 18:30:20 EDT 2000 | Dan Woodward
I can't help you with your soldering problem, but I wonder if a pressfit connector is an option for you. If this connector is available as pressfit, you can avoid the solder wave proces and associated problems. Write me if you are interested in more
winsouce.jpg)
