Electronics Forum | Mon Oct 04 10:24:51 EDT 2010 | jdumont
Anyone have any experience with them? Looking for a 1 or .5 meter conveyor and possibly a loader. Good prices for new equip, wondering if there is a reason why?
Electronics Forum | Fri Mar 24 08:10:12 EST 2006 | mapell
Hi AR Nice job on the chain/rail cleaning. I would contact Speedline Electrovert tech support, 800.737.8110 to assist in trouble shooting. They can walk you through using a meter to measure input and output current to the SC card and make sure tha
Electronics Forum | Tue Nov 02 15:57:20 EDT 2010 | g2garyg2
Anyone have any experience with them? Looking > for a 1 or .5 meter conveyor and possibly a > loader. Good prices for new equip, wondering if > there is a reason why? PROMATION has the best price on new 1M and 600 mm conveyors. They are often
Electronics Forum | Mon Jan 15 15:18:13 EST 2007 | jaimebc
We have an oMniflow 7 as well, and looking at the calibration procedure, it indicates that turning the pots ( total of 5 pots. 4 on the lower board and one on the upper board )fully counter-clockwise is the FIRST step of a series of tests. Then you w
Electronics Forum | Wed Jun 07 23:57:22 EDT 2017 | marcelll
Hi, Try to find replacement edge belt pulley for old PCT conveyor. Any idea where to find a supplier to buy small pulley for 1/4 inch edge belt ? Thanks
Electronics Forum | Tue Sep 01 10:55:41 EDT 2015 | emeto
Hi, 1. Take a multi meter and measure the voltage - I assume it is a DC motor(probably 24V). If you don't, check power supply,cable, relays and Driver for the motor. If you do have voltage, check sensors(sometimes sensor activated may stop your con
Electronics Forum | Fri Dec 07 14:44:35 EST 2007 | actech
I have ordered 3/16th and 1/4 from McMaster Carr in the past. you buy it bulk cut it at an angle and melt it together. I think its Mcmastercarr.com and look into belts or conveyor belting you should be able to find it online there.
Electronics Forum | Sun Feb 05 17:01:31 EST 2006 | GS
total footprint should be about 4 square meter Let's consider dimensions: - length (conveyor) = 1,58 mt - width (front+back)= 2,50 mt Regars.......GS
Electronics Forum | Wed Aug 23 02:48:11 EDT 2006 | ec
Hi, Appreciate someone could advise or forward a format to me how to work out number of pallet needed for wave-solder if the machine speed is at 1.0m/min, volume per month is 4500 sets, pallet length 0.3 meter, conveyor length 5 meter...... Looking
Electronics Forum | Tue May 06 07:29:10 EDT 2008 | cyber_wolf
I am looking at NEW connecting conveyors for our Fuji lines. So far I have looked at Simplimatic,Promation,and Jot. There seems to be a large spread in pricing. Has anyone out there purchased new conveyors lately..if so what is your take on it ? I