Electronics Forum | Tue May 25 03:41:50 EDT 2021 | ppcbs
Looking for a Pittman Motor for an SRT Summit 1100. It runs the pick up tube up and down. Gear ratio is 11.5:1 Around 24 vdc.
Electronics Forum | Thu Mar 10 12:11:30 EST 2005 | Rob
Hi P-Y, Nitrogen = 15 euros per hour. Solder replenishement = 1kg per hour at 11.5 euros per hour. Obviously there is also the labour involved in scraping off the dross. Cheers, Rob. NB. For all our US friends a Euro is a strange Belgian inventi
Electronics Forum | Wed Jun 06 03:36:06 EDT 2007 | pavel_murtishev
Good afternoon, Google search engine (http://www.google.com) might be very useful for you :) Much has been written on the net about the topic you are asking. So the search keys will be �X-Ray� and �Voids�. For instance: http://www.aciusa.org/leadfre
Electronics Forum | Thu Jun 27 23:49:40 EDT 2013 | cedric77
I had a solder paste SAC305 T4, with flux loading of 11.5%. After retrieivng out from fridge(5deg) after 48hrs, the paste turn dry (like dry mud? and after double checking the flux loading it becomes 12.5%. Has anyone ever experience this or any opi
Electronics Forum | Fri Feb 28 15:27:50 EST 2014 | tombstonesmt
Good afternoon! Looking to see what everyone else in the industry is running for print speeds regarding type 3 solder pastes. Our paste is a type 3 with 11.5% ROL0 flux content. The finest pitch component in our case is .5mm pitch. Our screen print
Electronics Forum | Wed Jun 03 22:07:41 EDT 2009 | davef
= 0.66 aperture opening to the stencil wall has been shown to provide the best transfer efficiency and repeatability of the deposited paste. Values from 0.66 to 0.8 insure a good paste release from the stencil. The biggest impact on area ratio is the
Electronics Forum | Mon Jan 23 22:53:31 EST 2012 | davef
= 0.66 aperture opening to the stencil wall has been shown to provide the best transfer efficiency and repeatability of the deposited paste. Values from 0.66 to 0.8 insure a good paste release from the stencil. The biggest impact on area ratio is the
Electronics Forum | Tue Sep 15 06:16:35 EDT 2009 | geb
Hi, We're using solder paste opposed to solder wire for hand soldering certain components. We are also using high temperature soldering irons with 450deg C tips as we are soldering onto aluminium (IMS) PCBs. The quantity of tips which we go through
Electronics Forum | Tue Apr 27 12:04:44 EDT 1999 | Bob
I hope I'm not too late with some help for you. I have purchased stainless steel wire cleaning baskets for a vapor degreaser from: Cooley Wire Products 5025 North River Road Schiller Park, IL 60176 847-678-8585 fax 847-678-8612 They do a very nice
Electronics Forum | Mon Dec 21 12:20:52 EST 2009 | MLD
Here is my question to the Guru's on this site. Lead free boards to go though Wave / reflow - and then sent through a water wash 2 day's prior to Hand assembling a 50mil ribbon connector. This is a 4 layer board with 2x2116 pre-preg (.036 1/1 5x762
