Electronics Forum | Thu Aug 22 02:18:09 EDT 2002 | mjabure
Specify the nozzle size as 1.4 in both the nozzle allocation table and the PD, the nozzles will still pass center test as the size variation is still within tolerence.
Electronics Forum | Thu Aug 22 23:18:03 EDT 2002 | mjabure
you're welcome. if you have any other questions you can e-mail me, my address here is mjabure@smtnet.com. Used to be a machine instructor for fuji.
Electronics Forum | Thu Dec 28 18:55:04 EST 2023 | triplettx3
Have you tried calling Mike Forseen at SMT research? Very knowledgable on these machines.
Electronics Forum | Wed Jan 16 14:18:38 EST 2008 | scotceltic
We have a problem with our wide view camera on our CP642. Does anyone have the replacement procedure laying around ? We need to replace it and Fuji is telling us that it is proprietary info. unless you have been to the class. Well we have a few gu
Electronics Forum | Thu Mar 22 17:18:17 EDT 2018 | rodrigo
Hi all, Our (new/used) CP642 resets the nozzles heads first time I do a nozzle centering after power on. But we're getting errors st17 and st19 and while working on the sensors I noticed that it does not resets the heads before I start a nozzle cent
Electronics Forum | Fri Dec 08 18:02:21 EST 2023 | jdengler
Not sure on CP6's but CP2 through CP4 series used jigs. We now have an AIMEXIII and it uses jigs. I would bet that there are jigs for the CP6 series machines.
Electronics Forum | Mon Dec 18 14:06:10 EST 2023 | cyber_wolf
I would check with these guys. One or both most likely have these jigs. http://www.ibesmt.com/ https://www.smtresearch.com/
Electronics Forum | Mon Jul 28 18:31:43 EDT 2003 | mantis
Hi There, First has the machine in question had the camera upgraded to accomdate 0603/0402. It sounds like there is a bad pickup on this part.Are all nozzles ok is feeder indexing correctly has part pick up position(Station 1) been calibrated. Hope t
Electronics Forum | Sat Jul 10 18:19:16 EDT 2004 | Alfredo Diaz
Hello All, We are in the process of setting up a SMT line and would like you guys to recommend a company who help us to do the movement, set up and alignment of the machines. Machines are MPM UP2000, Fuji CP642, Fuji IPIII, Heller 1800EXL Oven. Tha
Electronics Forum | Fri Jan 18 11:22:52 EST 2008 | vikkaraja
I went to class a long time ago and I have the procedures. I just have to find it. Just make sure you maintenance person knows what he or she is doing. It just takes a little patience. E-mail me your fax or phone number