Electronics Forum | Wed Mar 26 11:58:50 EDT 2008 | soudomphong
Hi everybody, I am looking for Jot bare board stacker. If anybody who has any idea or where to get it would highly appreciated, thank you.
Electronics Forum | Fri Jun 18 10:24:12 EDT 1999 | John Thorup
| first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an
Electronics Forum | Thu Jun 17 21:24:32 EDT 1999 | Dean
| first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads. an
Electronics Forum | Thu Aug 24 15:54:13 EDT 2006 | davef
It depends. What is: * Storage environment and period * Board laminate, epoxy, and copper thickness of PTH * Down stream process * Etc FR4 0.062" thick boards absorb between 0.08 to 0.1%Wt of moisture within a 24 hour period, and 0.2 to 0.23%Wt in
Electronics Forum | Wed Mar 04 21:24:04 EST 1998 | Ron Costa
Hello everyone! Does any know anything about bare board size variations? Is there a spec. or tolerance? I'm running small lots of boards and during the screen printing process I find that I cannot paste each board perfectly.I've tried other screen pr
Electronics Forum | Tue Aug 02 02:24:26 EDT 2005 | matjen
We are in search of a couple of used bare board loaders, or destackers. If anyone has info on where to find a couple of good used Board loaders Please let me know, thanks.
Electronics Forum | Fri Oct 24 13:00:36 EDT 2014 | markhoch
I'd check into the ASYS LSB-03 Bareboard Destacker. It isn't a gravity drop style. It uses edge clamps to clamp the top PCB on the stack and then drop it on the transport rail. So it doens't destack from bottom to top, it destacks from top down. We
Electronics Forum | Thu Feb 04 13:00:54 EST 2016 | tombstonesmt
Any manufacturers offer an off the shelf vacuum type bare board loader that can handle boards 16"wide and 22"long? We're having issues with our de-stacker since these boards tend to come in warped.
Electronics Forum | Fri Oct 24 19:27:28 EDT 2014 | wsp364
Do you know the maximum board size for that destacker? I left a message with a sales rep. btw- are you a Torch Lake guy???
Electronics Forum | Tue Oct 21 09:07:35 EDT 2014 | wsp364
My UIC destacker does fine with 2mm thick boards. However, I have to hand feed the 1mm thick boards. I have seen vacuum board placers for small boards but not for large boards. I need to get a solution for 24" x and 16" y boards that are only
.gif)
.gif)
