Electronics Forum | Wed Sep 13 11:08:08 EDT 2017 | emeto
Here are the basics for theta issues in teaching: 1. CAD part library should match machine part library orientation. 2. If your placement orientation is correct and your feeding orientation(orientation in your feeder) is correct, there should be no
Electronics Forum | Fri May 29 12:30:03 EDT 1998 | Jason Gregory
Hi everyone, this is my first time on this forum. I've only been an innocent bystander. Until now. I wonder if anyone out there knows of any technical publication (accessible over the net) that explains, in detail, the actual physics involved regardi
Electronics Forum | Wed Oct 25 10:26:02 EDT 2017 | swag
Yea, I always liked to program the way it physically sits in the feeder then rotate as needed in placement. Make sure rotation in feeder is 0 as well or you'll really get confused. Some machine mfg's recommend otherwise but it never made sense to m
Electronics Forum | Tue Sep 12 14:35:41 EDT 2017 | deanm
In trying to have things run smoothly with placement, I have to do a lot of theta adjustment to get the rotation right during placement. Even if the part looks good on the PnP machine screen sometimes it places differently than what is shown. If I u
Electronics Forum | Mon May 11 17:03:05 EDT 2015 | dilogic
Any advice how to (easily) replace theta timing belt on GSM Flex head?
Electronics Forum | Tue Nov 13 11:14:15 EST 2012 | jaimebc
For the past few weeks we have experienced an intermitent midas theta error.During normal production the machine times out while just after picking up a component waiting for the theta to center it.Sometimes it fails to leave a tool. Reinitianing the
Electronics Forum | Mon Jul 10 09:28:25 EDT 2006 | Bobpan
Have you tried turning the theta manually to feel if it is stiff or having a harder time turning. This will cause Quadalign errors. also be sure the handling is not set to 10% on the theta this is also a problem.
Electronics Forum | Wed Nov 16 18:20:39 EST 2011 | dontfeedphils
According to the message guide it just says that it's a error telling you to initiate the Hydra Theta axis. I suppose the encoder for the hydra theta motor could be losing count and causing it to need to be re-initiated, or it could be something to
Electronics Forum | Wed Dec 07 13:46:45 EST 2011 | cyber_wolf
When was the last time the backlight bulbs in the head were replaced ?
Electronics Forum | Fri Apr 25 05:05:26 EDT 2014 | briantmc
Hi Bobpan, Many thanks for your response. While none of your suggestions were new to me it did get me to thinking and going back to the start again only to find incorrect switch settings on the Theta Driver Card. PROBLEM SORTED! I don't know how