Electronics Forum | Wed Jul 20 23:02:44 EDT 2016 | nipun92
We are trainee engineers doing research on the vi technology 5k and 5k 3d AOIs, we would like to know the advancements that they have made in the new 3d 5k AOI, and any setbacks if there are any.
Electronics Forum | Tue Jul 17 15:48:50 EDT 2012 | tombstonesmt
From some of the equipment we have here at the facility you could expect the following: X Ray- ~$75K-$100K BGA Repair- ~$30K-$50K We don't own a reballing station.
Electronics Forum | Tue Sep 16 11:42:35 EDT 2008 | slthomas
If support is a concern, don't forget that any support provided by equipment manufacturers will most likely (certainly with Juki and Universal) require registration of the machines at a cost to you of probably $2k-$5k per machine. Some used equipment
Electronics Forum | Mon Mar 07 21:37:42 EST 2005 | ABHI
It depends on your product requirements. I have seen aluminium wire bonding operations in as high as class 100K clean rooms. These are the assembly areas for calculators. The best is class 10K clean room for wire bonding. You can go upto fine pitch w
Electronics Forum | Thu Jan 12 14:08:53 EST 2006 | jax
A few things that will determine the speed. Camera Questions: Will the parts use the "On-The-Head" or "Upward-Looking" camera's? If "Upward-Looking", will it be Standard or Digital? Feeder Questions: Will you use pnuematic, low-cost electric, or pr
Electronics Forum | Fri Nov 04 12:18:10 EST 2005 | fastek
Target price used is $10K-$15K Rick
Electronics Forum | Sun Apr 09 14:20:17 EDT 2006 | greatexpectations
Hi, This setup was recommended. Target is 20,000 board output per day FUJI GL-541 Glue Dispenser (USED) 32K FUJI GL 641 SCREEN PRINTER (USED) 57K CP-643E CHIP SHOOTER 255K (150 FEEDERS) FUJI QP-242E IP3 110K REFLOW 8 ZONE (IS THIS ANY GOOD) 4
Electronics Forum | Thu May 24 12:55:19 EDT 2007 | pjc
First off, go with HiE (Hi Efficiency) machines only. UP3K and UP2K have huge differences- board size, speed, options, etc... too many to list really. I would recommend UP2K HiE over UP3K HiE. Its a simpler machine and easier to find on the used m
Electronics Forum | Wed Dec 17 16:49:39 EST 2003 | adlsmt
Take a good look at Yestech. The in-line machines are under $100K with off line software. I think about $80K if you dont need side cameras. We replaced our Agilent SJ-10 with one and have been very happy with it. Last I knew the good benchtops out th
Electronics Forum | Thu Sep 09 04:45:02 EDT 2004 | Rob
Hi, Depends on where in the world you're based, but in the UK you can pick up a decent Universal GSM1 for around �12K-�15K ($20K-$27K). We place BGA's, huge fine pitch IC's, 72mm connectors etc with no problem. I believe they do up to 100mm feeder
winsouce.jpg)
