Electronics Forum | Wed Nov 04 22:14:17 EST 2015 | joej
Is anyone using this LED having issues?
Electronics Forum | Thu May 13 11:25:02 EDT 2021 | rsikora
Thanks for the replies. MCS is not on our 3030, it probably wasn't available on the 3030 model. The ethernet switch which connects the vision pc and the rtpc was found to be defective. The switch was replaced and the 3030 returned to normal operat
Electronics Forum | Tue May 11 12:33:21 EDT 2021 | lpbro
KohYoung>KY-3030>WinMCS.exe. We have WinMCS load on start up, there is an icon in the windows taskbar when it's running as well.
Electronics Forum | Mon May 03 15:58:52 EDT 2021 | lt
Koh Young 3030 SPI machine. Has been running for the last 1-2 years. Now, it boots up as expected, up until the point where it should Home, but it does not Home. Any ideas what could cause it not to home. I know the older KY's are sensitive about
Electronics Forum | Fri May 07 21:31:52 EDT 2021 | sosigguy
Have you checked WinMCS? it's the software in windows that controls the machine. if you open it up it might have thrown some error codes, i believe it has some diagnostics in it aswell.
Electronics Forum | Mon May 10 12:04:50 EDT 2021 | rsikora
Thanks for your reply. I haven't checked or used WinMCS for troubleshooting. Based on your reply, I looked or WinMCS within Explorer and could not find it. Used the autosearch function for "MCS" and "WinMCS" and the autosearch did not find it eith
Electronics Forum | Mon Jan 09 16:04:45 EST 2023 | proy
We have a Koh Young 3030 3D SPI machine - this was completely working and we shipped it out to storage, and brought it back. Presently now though - the Machine controller computer which is a Unix machine has a corrupted disk drive. The Windows comp
Electronics Forum | Wed Feb 02 01:20:30 EST 2005 | sg2004
Anyone can let me know what is the difference between UP3000 and UP3030 in features? And, if possible, let me know all standard features of UP3030. I couldn't find any standard spec on the web. Thanks.
Electronics Forum | Fri Feb 04 09:35:45 EST 2005 | glaucon
The base model UP3000 is really a general designation for the platform. The use of "UP3030" designated the configuration of the machine from the factory. The UP3030 (if memory serves me) came with 2D, a vacuum stencil wiper, and a paste dispenser. I
Electronics Forum | Fri Feb 04 11:43:53 EST 2005 | fastek
Yes...a UP-3030 will come with the automatic pin placement system and also 3D inspection. It's a fully optioned out UP-3000 basically.
winsouce.jpg)