Electronics Forum | Fri Jul 29 09:45:04 EDT 2005 | aj
I do not think you can modify a 8*4 feeder to 8*2. Suppliers make a hell of a lot of money out of feeders so I would say they have that one covered. I think you will have to bite the bullet and buy 8*2 feeders. If you find out that you can modify
Electronics Forum | Wed Jun 04 22:52:32 EDT 2003 | hwatali
Now we are in urgent to buy 1.FUJI CP6-4000 or CP6-5000 for 3 sets;2.FUJI CP643E for 2 sets;3.CP6 8��2 and CP6 8��4 paper feeder. If you can supply these to me,pls contact me asap.
Electronics Forum | Wed Feb 16 09:37:58 EST 2005 | beta
Hi Guys, I have a customer who requires 95 paper 8*4 CP6 feeders on the setup. We dont have the required quantity but we do have embossed feeders that we could use. Just looking for some onfo. on performance using paper in embossed feeders as I migh
Electronics Forum | Thu Oct 04 00:19:14 EDT 2018 | gaintstar
Flason SMT yamaha nozzles: http://www.flason-smt.com/product/Yamaha-CL12mm-Feeder-KW1-M2200-100.html http://www.flason-smt.com/product/Yamaha-CL12mm-feeder-KW1-M2200-10X.html http://www.flason-smt.com/product/YAMAHA-CL16mm-SMT-Feeder-KW1-M3200-10X.ht
Electronics Forum | Thu Oct 21 12:44:07 EDT 2010 | swag
We issue extra parts like this: 8/2 caps and resis. - 40 over 8/4 caps and resis. - 20 over 8/4 IC's - 7 over 12mm - 7 over larger feeders + stick + matrix = the correct # req'd. These #'s were based on our first SMT lines (used equip.) and we made
Electronics Forum | Tue Mar 06 08:00:30 EST 2012 | acsscott
Thanks for your input. I heard about the component size from someone else as well. They said if the component is greater than 8.4mm, it will not load another component next to it on an adjacent head, which is only 16mm away. The PLCC6 LED's are 5
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Tue May 01 13:52:51 EDT 2007 | jasont
plz advise if the below feeders are compatible on CSM 46/60 (are they downwards compatible?); 1. Philips series FV-84-xxxxxC, model PA2903/70 (2,4 pitch, 8mm) QTY=29 2. Philips series FV-82-7-xxxxD, model PA2903/73 0603-type (2,4 pitch, 8mm
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Thu Oct 04 00:01:59 EDT 2018 | gaintstar
Flason SMT FUJI Pick and Place Machine: http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-A10395-Fiber-Amplifier.html http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-Amplifier-A1038t.html http://www.flason-smt.co
| 1 |
