Electronics Forum | Mon Dec 25 14:23:17 EST 2017 | robertorocco
This machine is OK. The price is 7000 euro with 10 feeders 8mm
Electronics Forum | Tue May 06 10:14:18 EDT 2003 | k_h
A typical machine will have around 100 feeder slots. Manufacturers use the slots differently though, use 8mm feeder counts as your basis. Siemens, for example has 40 slots but you can get 2 (or 3) 8mm's per slot giving you 80+ 8mm feeders, while a Sa
Electronics Forum | Mon Jun 11 16:51:32 EDT 2012 | fredc
If the orings are the same as Quad they are .158 ID and .024 thick. These dimensions are in inches. The thread for the Samsung QSA30 is 5.0 X 0.8mm, this may be the same for the CP40. If this is the correct oring size is it special and relatively ha
Electronics Forum | Thu May 26 09:11:06 EDT 2005 | russ
This 10 - 20% loss, is it 20% of 10 parts or 10,000? How many parts are lost from a "Perfect feeder teardown"? For example our Samsung 8mm feeders lose 8 components on 4mm pitch every time the cover is released. So if we had an 8 piece run that re
Electronics Forum | Fri Dec 07 15:12:56 EST 2007 | teodor
Hello , I would like to collect your valued opinions what is better for beggining . Samsung CP-45NEO Juki 2060 Light Feeder Positions (8 mm) 104 80 PCB Size (min - max) 50x30-460x400 mm 50x30-410x360 m
Electronics Forum | Fri Mar 13 05:12:06 EDT 2009 | geb
Hi, Does anyone have problems with the cover tape not peeling back on the 8mm wide feeders. We often find that particularly at the start of the job, the cover tape doesn't peel back causing mis-picks. Thanks, Grant
Electronics Forum | Mon Nov 29 14:35:08 EST 2021 | proceng1
I have 10 8mm feeders purchased from alibaba, and they work fine, and do not appear in our maintenance log with any more frequency than the feeders that came with the machines. We do not use the IT system, so I can't speak on that.
Electronics Forum | Wed May 12 13:13:14 EDT 2004 | John S
Any one using samsung machines, CP40, CP50? I have a 24MM feeder that has 8MM pitch as lowest setting and I need to go to 4MM pitch. Any thoughts as to how I can achieve this? CP40/50 pushers are set for 1 push and higher. Thanks in advance
Electronics Forum | Mon Sep 14 17:36:34 EDT 1998 | Robert Steltman
We are looking at a third P&P machine for our factory. I have received brochures on a SMASUNG CP30V machine. It looks great and has all the plus points for a contract manufacturing company such as ourselves. The basic specs are: 14400 cph - 3 heads
Electronics Forum | Fri May 06 07:58:33 EDT 2016 | cyber_wolf
Darby, I'm not completely sure I understand. Juki machines have what is referred to as a multi-head. The offsets between the heads are the same as the spacing between 8mm feeders. So the (6) heads all come down at once and "gang pick" from 6 8mm fee