Electronics Forum | Tue Oct 03 09:23:55 EDT 2006 | kenscj
We are encountering BGA solder open connection. At Functional Test, the board failed. Debug guy diagnosed this BGA open connection (2 locations), by using multimeter. Under 5DX inspection, there is connection. Take the board for localised reflow at
Electronics Forum | Mon Nov 23 15:14:11 EST 2009 | bking
I recently had to change pc's because of a crash, I can't get the flexa exporter to work, it keeps coming up with the following error: Converting CAD file Error [L: 0 C: 0] Failed to acquire API library file "FlexaUnicamFxToolkitProxy.dll". Mes
Electronics Forum | Tue May 26 23:42:20 EDT 2020 | smiran082
Hello, I am having trouble the QSV-1 PNP machine. On boot it had trouble connecting to the RT computer as it was hung on a message saying something along the lines of, "Establishing connection to RT computer". After several restarts we still could
Electronics Forum | Wed Apr 26 18:35:07 EDT 2023 | poly
I'm looking to make a board support table fixture that is connected to the printer and uses the vacuum manifold of the printer. Printer is an mpm Accela
Electronics Forum | Mon May 13 13:45:33 EDT 2019 | whitelancer64
I am having the same problem with the MPM Accela solder paste printer machine. If the fiducials are adjusted for PCB alignment, the location of the paste is then wrong, and vision inspection fails. This is a problem for both pad preview inspection
Electronics Forum | Thu Jun 30 08:00:07 EDT 2005 | Nirmal
pls check at rear side is there any relay spark or else check the connection between the monitor and the control card
Electronics Forum | Sun Sep 18 20:42:37 EDT 2005 | Ken
Link Fail is the RS232 connection to the FCU. I would check the connector, cable that plugs into the computer. Verify all power supplies are working. The most likely scenario is this: Computer malfunction Cable / connector issue. Defecive FCU
Electronics Forum | Mon Jul 07 09:47:50 EDT 2008 | davef
Dye & pry test reveals the solder connections that have failed prior to performimng the test.
Electronics Forum | Wed Jun 18 02:43:37 EDT 2014 | tjbooc
CHECK IO BOARDS STATUS, CHECK HEAD IO 24VDC SUPPLY, CHECK 24VDC SUPPLY TERMINAL, CHECK WIRING CONNECTED TO HEAD IO I think this is an I/O communication problem. Fail in connecting to I/O cards.
Electronics Forum | Thu Nov 21 01:01:33 EST 2002 | chao liang
Who had building the f4g and c/c server , when I set up the f4g and the c/c server I found them could not transportion , The FTP could work in normal ,the error code is 417c0021 :c/c connection to failed ,[cann't connect local socket [ connect :10060
