Electronics Forum | Wed Apr 19 16:24:11 EDT 2006 | patrickbruneel
Here's an other option called seal and peel http://www.interfluxusa.com/misc.html
Electronics Forum | Mon Jan 29 20:25:24 EST 2007 | davef
We allow no silicone in our shop, because they ruin solderability.
Electronics Forum | Thu Feb 01 09:46:54 EST 2007 | blnorman
Especially VCM - volatile condensable materials. Strictly verboten around optics.
Electronics Forum | Thu Apr 20 09:53:25 EDT 2006 | samir
Amol, good call there. Silicone mask and silicone coatings are friendly with each other. This was 1995, and at the time, there were no silicone boots available on the market.
Electronics Forum | Tue Apr 13 23:27:34 EDT 1999 | Mike Flori
I need to cure conformal coat on a 19" x 15" board. The material needs 7 - 10 minutes at 100deg C, but I have limited floorspace so I'm looking for an oven with about 36 inches heated length and 18 or more inch wide belt. The material we are consider
Electronics Forum | Wed Jan 31 17:01:34 EST 2007 | rw
I'm not that concerned about the solderability of the motor. Our customer is concerned about the outgassing of the conformal coat effecting the motor brushes. Silicone will break down into SiO2 and SiC will result from a spark between the brushes a
Electronics Forum | Tue Jan 30 14:12:12 EST 2007 | blnorman
We use nothing but silicones and have for at least the last 7 years. We don't have relays, but we do have motors. No issues with soldering, but our lines are constructed such that the last solder operation is a good distance from the coating or pot
Electronics Forum | Wed Apr 19 15:44:39 EDT 2006 | choppy
I'd also say to be very careful about contamination espacialy with boots. Some companies use oily products on there boots so be careful.
Electronics Forum | Tue Jan 30 18:34:56 EST 2007 | realchunks
Hose and/or Dave, Please elaborate of how the silicone can affect soldering. Material itself or fumes?
Electronics Forum | Thu Feb 01 08:47:07 EST 2007 | davef
NASA is concerned about outgassing in high-vacuum environments. They select materials to minimize outgassing. http://outgassing.nasa.gov/og_desc.html