Electronics Forum | Wed Sep 10 17:21:08 EDT 2008 | gregoryyork
Strange we use the 179~C eutectic 62/36/2 solder paste as standard in Europe. It is indeed 2% Ag in fact we dont sell 63/37 paste or very rarely. I think if you mix a little 60/40 powder with the 2% Ag alloy this overcomes the tombstoning problem.
Electronics Forum | Tue Oct 05 08:01:57 EDT 2010 | scottp
Have you confirmed in an SEM that the break is in the solder and not in the termination? If not in the termination, is it in the intermetallic rather than the bulk solder? It's unusual for the break to be in the solder joint when chips are knocked
Electronics Forum | Thu Jun 24 09:57:44 EDT 1999 | Vic Lau
Dear guys, I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now using a no
Electronics Forum | Thu Jun 24 10:11:33 EDT 1999 | Dave F
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Thu Jun 24 16:19:46 EDT 1999 | Kennyv
| | Dear guys, | | | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are no
Electronics Forum | Thu Jun 24 16:23:18 EDT 1999 | Kennyv
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Wed Aug 11 10:21:03 EDT 1999 | Brian
| Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulation
Electronics Forum | Wed Aug 11 11:54:50 EDT 1999 | Dave F
| | Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulati
Electronics Forum | Thu Jun 24 13:12:15 EDT 1999 | MD Cox
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Thu Jun 24 15:44:12 EDT 1999 | Earl Moon
| | Dear guys, | | | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are no
