Electronics Forum | Tue Feb 17 14:33:27 EST 2009 | tedel
Realize this thread is a bit old, but others may start inquiring soon... Just learned Biral USA in McLean, TX is no longer in buisness. Does anyone know of any other stateside distributers for the Biral T&D? Called 'Grainger' and they do not carry it
Electronics Forum | Wed Mar 12 16:30:45 EDT 2008 | operator
I witnessed this at our sister company. It seems to be their standard process. It is not my place to interfere with their processes. I was just curious if there was any chance of brittle solder joints or other defects that might be caused from the WS
Electronics Forum | Thu Mar 20 15:36:45 EDT 2008 | ipdisplays
Much thanks again for the replies. Does anyone have any experience with UIC GSM1 machines & feeders & overall programming & use therein? I've come across a couple of these that are in the same price range. I seem to remember UIC having a decent rep
Electronics Forum | Tue Mar 18 14:00:25 EDT 2008 | rrpowers
There are 2 reasons for wanting to change to an enclosed print system: - Reduce solder paste usage. (We run a high volume application so any reduction in paste scrap is a big money saver to our company.) - Improved print quality. (Ours is a non-rew
Electronics Forum | Mon Mar 24 22:46:53 EDT 2008 | crashoveride
Don't try the mecha check yet unless you know how. have you checked the coupling shaft of Y-axis? If it's ok, take a look at the ball screw if it looks like being scratched or something unusual. Also, observe the movement of the machine if you hear a
Electronics Forum | Mon Mar 24 12:11:11 EDT 2008 | jdumont
Thats the one I found while researching this AM also. Thanks for the assist. Any ideas if this can be process related? Im sure it can be but its odd that it only happens on one vendors board. I think because it is an 10 layer board that maybe they ha
Electronics Forum | Wed Mar 26 10:06:54 EDT 2008 | nibirta
hi folks, i have a question....does anyone knows a method for OSP measurements? well we have some troubles with a non-wetting process. we think that the copper is oxidiezed. There is a chemical test for "measuring" the osp when u count the seconds u
Electronics Forum | Wed Apr 09 03:21:36 EDT 2008 | fnorradd
Hi Steve, The adjustable workboard holders are a mixture of universal and aftermarket, they do not use the clamp down arms which were originally with the universal pbs holders, they are the type which have two grub screws holding the clamps to the h
Electronics Forum | Tue Apr 08 07:25:09 EDT 2008 | kevinjm
Hi all, Can anyone tell me where to get a motherboard for an AP27. I've tried speedline already but I'm being told we need to upgrade the whole pc which we find a bit too expensive. If anyone has any suggestions it would be much appreciated. Thanks
Electronics Forum | Tue Apr 08 09:30:35 EDT 2008 | kbyrne
Hi all, Can anyone tell me where to get a > motherboard for an AP27. I've tried speedline > already but I'm being told we need to upgrade the > whole pc which we find a bit too expensive. If > anyone has any suggestions it would be much > appre