Electronics Forum | Fri Aug 03 17:00:57 EDT 2001 | mparker
Start with a definition of what you expect the AOI to achieve at each station. Will your in-line machine be post print? Place (pre-reflow) or post reflow? Rather than buy one very expensive machine to put at the end of the line, maybe a couple of
Electronics Forum | Thu Oct 30 10:16:22 EDT 2008 | muarty
I am looking for a straight forward Gage R&R test I can use when evaluating AOI equipment. Anyone carried out similar? Thanks in Advance
Electronics Forum | Fri Dec 01 16:51:14 EST 2006 | tony_d
Hello Lou, I agree with John S. There is no substitute for first hand experience. I recently evaluated these machines among others for my company. I selected Mirtec based on ease of programming, inspection performance and Gage R&R testing. We
Electronics Forum | Mon Mar 31 18:05:46 EDT 2008 | mobytahoe
We evaluated (in-house) 3 Paste Inspection Machines: 1.Siemens 2.Agilent 3.Cyberoptics We also evaluated the MVP and Orbotech off-site. BY far, the CyberOptics machine performed the best. Gage R&R was remarkable, the s/w is second-to-none, pricing
Electronics Forum | Wed May 23 08:39:37 EDT 2012 | tony_d
Thomas, We evaluated several AOI machines and narrowed the field to two, YESTech and MIRTEC. We had an opportunity to work with both of these machines on our production floor. In our experience, the MIRTEC machine simply outperformed the competitive
Electronics Forum | Thu Sep 07 09:32:14 EDT 2006 | tony_d
Hello Saaitk, I was recently tasked with selecting an AOI system for our company. We are a low to medium manufacturer as well. I looked at several different vendors and narrowed the field to Mirtec and Yestech. I found that the programming was v
Electronics Forum | Fri Sep 05 15:10:18 EDT 2008 | tony_d
Hello Federico, I know what you are going through. A few years back, I was faced with having to purchase AOI equipment for my business. My selection team and I looked at several different manufacturers including MVP (too difficult to program!). We
Electronics Forum | Thu Jan 13 10:40:38 EST 2011 | tony_d
Good Day Michelle, If you are looking for a solid AOI system that is simple to program and extremely accurate my recommendation is MIRTEC by far. We checked out several machines and narrowed the selection down to two, YESTech and MIRTEC. We had an
Electronics Forum | Wed Jun 22 22:48:46 EDT 2011 | tony_d
Hello NHTech, When it came time to invest in AOI, my team and I checked out several machines. We run a wide variety of products and our changeover is high, on the order of five to ten jobs per day. MVP is one of the machines that we looked at, how
Electronics Forum | Sun Oct 26 09:05:09 EDT 2008 | tony_d
Hello INGE FI, I know what you are going through. A few years back, I was faced with having to purchase AOI equipment for my business. My selection team and I looked at several different AOI manufacturers. We found that only two AOI vendors were sui