Electronics Forum | Wed Jun 24 22:39:27 EDT 2020 | kylehunter
Thanks so much for all your help! That's amazing that electric feeders like that exist. I will definitely be reaching out to them and evaluating them. I think you may be made a typo though. The standard black handle 8mm feeders have a 4mm pitch. The
Electronics Forum | Thu Jun 16 11:07:15 EDT 2005 | Arek
Walcome, I am looking for an information about repetability and accurancy of placing component 0201 on the machines: Assembleon Topaz Xi II and Emerald Xi II. What is your experinces and is it a good chose to buy them for placing component 0201.? Do
Electronics Forum | Wed Apr 27 16:55:38 EDT 2005 | grantp
Hi, The 8mm versions do change fast, but the 12 and 16mm versions jam all the time, and MYDATA has no fix for it, as apparently no one else is having that problem. Regards, Grant
Electronics Forum | Fri Mar 15 21:20:18 EDT 2024 | compit
Check out Yamaha - also old. A large number of parts (the same machines under the Assembleon, Philips brand), cheap feeders, many parts suppliers. Models from 2 to 16 heads, e.g. Emerald-X can accommodate 84 INDEPENDENT 8 mm feeders.
Electronics Forum | Sat May 19 02:42:03 EDT 2007 | vinitverma
Hi Bart, I suggest you have a look at Assembleon's OPAL XII. They have a special offer at this moment. You can select the machine with 4 heads (standard) and later if higher speed is needed, you can upgrade it to 8 heads. the machine is capable of h
Electronics Forum | Fri Mar 22 17:14:15 EST 2002 | jseagle
What is the height, width, and length of the connector, packaging? We currently place a 2x20 2mm gull wing SMT connector measuring 8mm H x 38mm L x 6.1mm W, packaged on tape and reel with a plastic pickup in the center. We do this on an Assembleon
Electronics Forum | Wed Aug 12 14:35:33 EDT 2015 | ehess
having a problem with several heads miss picking 8mm feeder parts. Had to bypass 2 of the heads because it was becoming such a hardship. Heads 3, 4 (bypassed), and 8 (bypassed). On 3 and 8, it will miss so many it errors, and when I clear the erro
Electronics Forum | Thu May 10 02:57:03 EDT 2001 | kjellman
Hi, Why not have a look at Philips/Assembl�on, their ACM machine is quite nice. It may also bring you down to Flip Chip, 0201 some through hole and odd form placement. Nice options like bulk feeding, coplanarity tests, fluxing for FC, prom feeders (
Electronics Forum | Fri Feb 13 11:22:17 EST 2015 | slarochellesmt
I can offer some background on the IINEO II as I feel it is much better than the Yamaha. I currently have 3 IINEO IIs in production that replaced 3 Assembleon lines. The IINEOs handle quick changeovers better than any SMT line that I have used to d
Electronics Forum | Thu Oct 04 00:07:29 EDT 2018 | gaintstar
flason smt SMT spare parts: http://www.flason-smt.com/product/SMT-spare-parts-Assembleon-Controller-Bvm-5322-216-04698.html http://www.flason-smt.com/product/SMT-spare-parts-Assembleon-Control-V2-1-Rev-B-8mm-4022-594-10010.html http://www.flason-smt