Electronics Forum | Wed Nov 12 11:32:36 EST 2003 | lloyd
Depending on quantities etc, you probably have a few options. If it's the automated route you require then any of the radial insertion machines from UIC or TDK will do the job. We've inserted LED's in the past with machines over 10 years old, so if
Electronics Forum | Fri Nov 21 13:14:21 EST 2003 | pjc
Panasonic is another supplier of automatic radial lead insertion machines. Go to: http://www.panasonicfa.com/cgi-bin/product.cgi?prodline=electronics%20assembly&category=Pin%20Through-Hole∏id=rh5 www.panasonicfa.com
Electronics Forum | Wed Nov 26 13:09:48 EST 2003 | haviland
Dmitry--Good afternoon. We are dealers in used and reconditioned assembly equipment, and can provide the radial insertion machines required for this application. Regards, Nick Haviland, Electronic Assembly Machinery Exchange, (WI & IL, USA) (262) 24
Electronics Forum | Tue Nov 11 08:08:43 EST 2003 | Chris
Use a Radial lead inserter. you will need 1 head for each different part number you have. the machine cannsert 2.5 $ 5.o mm lead components and 7.5 with special to0ling. For LED you want to use a Radial with the new dual spocket CTA (Component transf
Electronics Forum | Mon Jun 18 22:08:45 EDT 2012 | bigvern
Hi, we are trying to locate some parts for a DEHAART semi auto printer, if anyone has any old spares machine, please advise. Have tried most of the phones numbers on this forum in regards to dehaart but all numbers are no use due to dehaart being fi
Electronics Forum | Wed Jun 06 16:24:17 EDT 2012 | davef
Back in 2004, Jon said ... There is a company called Lake Madsen Inc that has access to the old prints, schematics and many of the old deHaart employees. The company was started by the dehaart machine shop supervisor when he found himself out of a j
Electronics Forum | Tue Nov 11 04:48:48 EST 2003 | Dmitry
What kind of equipment is used to insert LEDs into PCB? LEDs are in tape form. Thank you for your help!
Electronics Forum | Mon Nov 24 10:41:29 EST 2003 | ilona
Hi, there is also a German company making odd-shaped component insertion equipment, actually very very suitable for LED placement and soldering in the same process cycle. LED's are held in position until soldering is complete, straight and in the s
Electronics Forum | Fri Jun 10 12:51:54 EDT 2016 | ttheis
Our company is looking to upgrade from a dek249 semi-auto printer to an automatic inline printer since we're doing some fine pitch packages which are tricky to line up, and we'll soon be tackling bga's for our products. We're looking on the used mark
Electronics Forum | Wed Jun 15 16:34:24 EDT 2016 | emeto
Try to stay away from very old machines. Most of these machines are so beaten up, that it is hard to put in action(expensive as well). I just got one MPM 10 years old and to make it work it will cost us 10k usd and a lot of labor. In the current cond
