Electronics Forum | Thu Sep 21 20:37:21 EDT 2006 | basem
Does anyone on this forum has experience with any of i-PULSE SMD placement systems? I am looking at the M4e. Also, can someone advise me on what to choose if the desired final circuit is of very high density and small pitch (0.5mm)? I am considerin
Electronics Forum | Fri Sep 22 17:18:40 EDT 2006 | basem
Thanks Rob, thanks much. Bill, take it easy. You have a well controlled image (considering the brain-washing machine of the American media) of Syria that is fairly wrong. I lived in the US for six continous years and I really know what I am talking a
Electronics Forum | Wed Feb 21 06:11:41 EST 2007 | CL
Good Morning, We have 5 Mydata MY machines in separate lines. We are placing 0201's, uBGA's, CSP's, etc.... I cant say that we have never had accuracy problems but whatever caused the problems was identified and they are fairly accurate as far as I'
Electronics Forum | Mon Nov 21 14:22:22 EST 2011 | mosborne1
Tim, The main controller card has a battery on it. Power down the machine and disconnect power. Stick a credit card between the battery and the clip. Hold for at least 60 seconds. Then power back up the machine. Make sure to have yourmod codes writ
Electronics Forum | Wed Apr 26 11:58:32 EDT 2017 | bobpan
Mod code 7 is a placement delay.....changing it will slow your entire program down. If you just want to slow it down for 1 placement.....you have to insert a mod code change in the sequence steps....this is easily done in central controller. Good L
Electronics Forum | Wed Nov 16 14:44:31 EST 2011 | olddog
Bobpan, thank you for your speedy response. As to the items you noted: 1. I did a test of Funct 30 for the first 5 nozzles, 2 times each as follows: noz1 Ht=215 & 219, center=1005 (all nozzles all tests), run out 2.2 & 2.7. Noz2 Ht=228 &228, runout=
Electronics Forum | Sat Oct 17 08:03:47 EDT 1998 | Stefan Witte
I think the Universal and the Siemens machine are a good marriage. However, dealing with two different vendors may create additional difficulties. As both parties want to make the deal with you, you might want to bypass the sales people to get more i
Electronics Forum | Wed Nov 16 04:48:15 EST 2005 | carsten
Thanks for your help guys! No, I do not expect a Ferrari at this low budget, we are not contract manufacturers, but only producing our own devices in the area of industrial control and measurement. And we do not expect to have 402 parts in the near f
Electronics Forum | Fri Jun 26 09:09:17 EDT 2009 | boloxis
thanks James, that is good to know about Assembleon. Siemens does that all the time to me nowadays. Anything that anybody want to say to Universal Advantas X ? I benchmarked a Universal AC30 + AX11, an Assembleon MC24 + MC1, a Siemens SX2 + SX1, a Ju
Electronics Forum | Mon Nov 09 09:18:09 EST 2009 | meritajs
I absolute agree with Adlsmt that your subcontractor was slipshod worker. It’s impossible for normal subcontractor make such fault. For last 15 years I worked for subcontractor firm here in Riga Latvia. Our company was not very advanced. As I said be
