Electronics Forum | Tue Nov 19 02:59:24 EST 2002 | yngwie
Hi Experts out there, pls help me with the following matters. How important is the bare PCB baking ? What is the temperature for baking @ what RH ? What would be the impact for the ENTEK finished board should the baking is really necessary ? For t
Electronics Forum | Wed Nov 20 16:53:18 EST 2002 | davef
Q1: How important is the bare PCB baking ? A1: Baking boards is a non-value added activity. Q2: What is the temperature for baking @ what RH ? A2: Search the fine SMTnet Arcives for bake recipes. Q3: What would be the impact for the ENTEK finishe
Electronics Forum | Thu Jul 12 02:15:53 EDT 2012 | thmeier
Check also the specs / recommendations of your PCB manufacturer. We bake boards 4h/120°C before reflow and after automated cleaning (it´s not FR4!) and also if we have to rework with the autometd rework- stations (massive IR underheating ,..). Regar
Electronics Forum | Tue Mar 21 20:37:51 EST 2000 | Dave F
Charlie: I�d plan never bake boards. Check the SMTnet Archives. Dave F
Electronics Forum | Tue Mar 21 17:32:48 EST 2000 | Charles Barker
Greetings all you knowledgable SMT persons! 1. Typically, for multi-layer (6-8 layers), FR4, SMT boards stored in an air conditioned environment at about 50+/- 10% RH, how many months (or years) would you allow to pass before you would recommend bak
Electronics Forum | Tue Aug 14 15:45:06 EDT 2001 | davef
BOARD BAKING SCHEDULE: Bake time depends on the board thickness and construction. For laminated FR4 PCB, we bake between 6 and 24 hours at 100�C. ROOT CAUSE OF THE PROBLEM: Heating moisture entrapped between the laminations of the board too quickl
Electronics Forum | Wed Mar 29 04:14:49 EST 2000 | Marc
Charlie B: You mentioned that you have an air conditioned environment and a RH 0rf 50, baking the boards is predominately done when the history of the PCB delivery and / or previous storage conditions are un known. When I was with a CM, we did this a
Electronics Forum | Thu Oct 26 12:27:40 EDT 2000 | Dave Cunningham
What guidelines would you suggest for an assembly house concerning the baking of bare PCB's (assume FR4) and flexes/rigid-flexes before assembly.
Electronics Forum | Wed Aug 07 08:46:38 EDT 2002 | davef
The time and temperature required for baking moisture from your boards varies according to the conflicting desires to: * Remove enough entrapped moisture. * Desire to retain solderability of solderable surfaces. Search the fine SMTnet archives for s
.gif)
.gif)
