Electronics Forum | Thu Jul 27 17:42:15 EDT 2000 | JD of Panasonic Create
Have you heard of them and where can I get information on their systems? Sincerely, J.D. jtalken@panasonicfa.com
Electronics Forum | Mon Jun 15 23:19:38 EDT 2020 | kylehunter
You literally just loosen both hex bolts and slide the bar to the pitch you want. Then tighten the bolts. You can also remove the bar, and flip it over to get additional pitches.
Electronics Forum | Tue Jul 23 05:41:13 EDT 2002 | kumarraju
first you need to have bar code stickers put on to your feeders.You need a tracking software to track your feeders using the bar code.you need to do periodic maintenance on your feeders and very important is calibrations.it is best to set up a feeder
Electronics Forum | Thu Aug 19 16:50:39 EDT 2004 | davef
The best way to reduce change-over time is to: * Buy lots of feeders * Limit the number of part numbers available to design engineers * Bar code feeders to help verify proper machine setup We know of no such software. There IS software that recomme
Electronics Forum | Wed Jan 12 08:31:53 EST 2005 | steveliu
I am looking for a bar code scaning system to help our feeder setup. Can anyone provide me with some information regarding this? Thanks a lot.
Electronics Forum | Thu Aug 20 15:15:49 EDT 1998 | Wayne Bracy
| We are looking at implimenting a bar code system for a SMT | production line. To start we are looking at label printer/applicators. Are there any other companies that we should consider besides Zebra and Imtec?? Thanks for your input. | John Joh
Electronics Forum | Wed Oct 21 02:42:50 EDT 2009 | jlawson
there are Maintenance - Asset management systems available but usually part of a bigger MES system, bar code driven etc, keep databases on feeders, machines, trigger times to inspect etc etc but no cheap...
Electronics Forum | Fri Jan 31 13:45:49 EST 2020 | slthomas
We had a custom bar code storage and feeder setup. Stores material handlers would bring the parts to the line, scan the part number on the kanban card (always accompanied the parts), and the storage location LED flashed so they knew where the place
Electronics Forum | Sat Feb 27 17:03:07 EST 2010 | deltaservices
Sorry I have never worked on the csm's you can get an old topaz for nearly nothing. Those are easy to calibrate. What could be an option is to place an X-row of chips under 0 degrees 4X then 90degr 4X then 180degr 4X then 270 degr 4X. Place them al
Electronics Forum | Sat Oct 08 04:24:37 EDT 2016 | aaronpainter
We are having an issue with the solder bars hanging the solder feeder dripping down the back side of the pot, and leaking in to the area where the terminal block for the elements on the pot are. We have tried aluminum tape to close off the gap betwee
