Electronics Forum | Thu May 25 10:58:38 EDT 2006 | barryg
Does anyone out there have much experiance with the testronics bench aoi system? We apperently cannot get a demo and are considering the testronics and a mirtec system. Any other systems out there that are in the 25-60k range you would recommend?
Electronics Forum | Thu Jun 22 14:53:03 EDT 2006 | CL
Soboc, Mirtec does have support, service and spare parts in Oxford CT. Chris
Electronics Forum | Wed Jun 20 21:07:25 EDT 2012 | bigboy
Have a look at AOI Systems Scanspection AOI. The desk top unit is very affordable, easy to use, and a very effective tool for new users to AOI. Visit http://www.aoisystems.com for more information or send me a PM and I will be happy to talk with yo
Electronics Forum | Tue Jun 13 23:16:32 EDT 2006 | mrduckmann2000
WE LOOKED INTO THE YESTECH AND THE MIRTECH. TODAY WE ARE INSTALLING OUR NEW MIRTECH AOI MACHINE. WE CHOSE THIS MACHINE OVER THE YESTECH BECAUSE OF IT'S OFFERINGS. THE YESTECH WAS A CLOSE SECOND. I WILL POST LATER ON THE PROGRAMMING, THEY ARE ALL
Electronics Forum | Tue Jun 19 18:39:43 EDT 2012 | 1036
Want to buy a benchtop AOI system for my assembly shop. New to this kind equipment. Wondering what brand/Model we should go with. Any suggestions would be highly appreciated!
Electronics Forum | Tue Jul 03 11:19:15 EDT 2012 | padawanlinuxero
Hello I have 2 Mirtec MV-7 AOI's and we have never had any problems with the inspection on these machines, in the hardware they are tough, one has been running more that 6 years only with the preventive maintenance and some wearable parts.
Electronics Forum | Mon Jul 02 07:41:08 EDT 2012 | jsolloway
I am going through the process of re-evaluating our AOI systems. Depending on the complexity of your assemblies, I would recommend Mirtec's, and aoi systems as the previous post suggests. Had a demo from them a month or so ago and for the price the
Electronics Forum | Wed Jul 04 10:08:23 EDT 2012 | daxman
I would agree with innova's suggestion of Marantz. I've seen 3 different AOI machines implemented into our shop, and you really have to consider the ease of use, and possibility of defects that operators can introduce. AOI's, theoretically, look good
Electronics Forum | Fri Dec 05 08:30:55 EST 2003 | pjc
If your operation is hi-mix low-volume, consider taking a look at some of the bench-top units out there. They are lower cost but can give similar performance as higher cost in-line systems. Some of the bench-tops cannot do solder fillet inspections t
Electronics Forum | Wed Dec 10 15:45:02 EST 2003 | Carl
If your operation is hi-mix low-volume, consider > taking a look at some of the bench-top units out > there. They are lower cost but can give similar > performance as higher cost in-line systems. Some > of the bench-tops cannot do solder fillet
