Electronics Forum | Tue Mar 06 17:22:42 EST 2012 | acsscott
OK, did some more testing this afternoon. First, I moved the LED’s from feeder location #23 to Feeder location 30. This is three down from the other component(#33) it is picking, so it should be able to hit them both at the same time for two of the
Electronics Forum | Tue Mar 06 17:24:31 EST 2012 | acsscott
OK, did some more testing this afternoon. First, I moved the LED’s from feeder location #23 to Feeder location 30. This is three down from the other component(#33) it is picking, so it should be able to hit them both at the same time for two of the
Electronics Forum | Fri Aug 04 11:13:34 EDT 2017 | tombstonesmt
One tip that I found very useful in this application that hasn't been mentioned is auto pick up position teach. Our Panasonic equipment will constantly move the pick up position in regards to the center of the nozzle when scanned. On older Panasonic
Electronics Forum | Thu Sep 11 15:56:33 EDT 2003 | Ashok Dhawan
We observed a manufacturing problem due to innovation in LED technology. The most new LED products are colorless and lights up in different colors only when powered. This is great feature , however, it has created new problem for manufacturers who
Electronics Forum | Mon May 02 18:40:50 EDT 2005 | russ
I don't know what machine type you have or what the nozzles look like but we use a standard nozzle with an I.D. of either .8 or 1.5mm. We rotate and pick up the part somewhat slowly.
Electronics Forum | Tue Sep 04 13:11:06 EDT 2007 | ratsalad
Let me know how you make out with these. We are looking in to building some boards with them as well. Don't touch the dome with the nozzle when you pick the part!
Electronics Forum | Tue Jul 06 23:12:02 EDT 2010 | bubbobbed
hey, I'm having the same problem as you are. the component is sticking on the cover tape prior to pick and place. hoe do you address the problem??
Electronics Forum | Thu Apr 05 13:52:07 EDT 2012 | christian01976
Hello! Did you try to pick all parts with the same type of nozzle? The LEDs are not so big that you have to use a nozzle 74. Christian
Electronics Forum | Wed Mar 13 17:13:36 EDT 2013 | isd_jwendell
On an Essemtec machine I solved my sticky tape problem by routing the cover tape different than normal so that it pulls back more instead of up. I'm not familiar with your feeders and don't know if that is even a possibility.
Electronics Forum | Fri Apr 05 11:36:48 EDT 2013 | denisp
we use panasonic mv2vb feeder q type and we place a little piece of magnet under the reel and it help a lot