Electronics Forum | Fri Oct 13 15:03:49 EDT 2006 | stepheniii
When I started using our ESV-304 the CAD converter would crash if there was a part already in the library with an alias. With the two cameras we can only put parts from one camera in the library. And our current library would be totally useless with
Electronics Forum | Tue Mar 17 16:09:25 EDT 2009 | gregf912
For the IP3 to reliably place BGAs the machine needs the 4800 vision card and type 12 camera. From the problems i see here you must have the 4400 card and a type 8 or 9 camera. It would also seem that a calibration is in order. I have calibrated and
Electronics Forum | Mon Feb 16 12:33:58 EST 2015 | ianatvadatech
Hey Syed, I've been running the MV-9 for just over a year. We shopped around very extensively (two APEX shows) before switching from yestech to mirtec and we bought two of the best systems they had to cover the four lines we run. Two systems are fa
Electronics Forum | Sun Aug 29 11:33:38 EDT 1999 | Malcolm Montanjees
| | fuji gp, cp642e, ip3 and other | | Dear Sir, please explain what you mean by GP, are you referring to Fujiu GSP printers? if so, what models are you looking for. We have GSP3-5000 and GSP3-4000 avaiable for immedate sale at $25,000 each. FOB Nor
Electronics Forum | Tue Oct 08 18:57:45 EDT 2013 | soscomputer
Hi i'd like to know if i can find another thing like this station : zhuomao zm6200 with optical alignment and camera to pick/place BGA or other component. Because people told me that is a chineese copy and maybe not have the real tc to reflow or reba
Electronics Forum | Tue Mar 17 11:13:26 EDT 2009 | tegel
Hi, Now it was a couple of years since I did this but it's possible. I have been down to 0.5 mm pitch. If you have a vision system with vision type 230 I would suggest that you use that. One other trick is to only specify 50 % of the ball diameter.
Electronics Forum | Thu Sep 11 10:01:30 EDT 2014 | spoiltforchoice
1 - Too messy, parts already come in nice easy to use machine compatible packaging, tapes, reels, tubes and trays. All you are doing is adding an extra step and complication. A key production aim is to reduce the number of steps. 2 - BGA - a chip wi
Electronics Forum | Sun Aug 29 18:08:29 EDT 1999 | M Cox
| | | fuji gp, cp642e, ip3 and other | | | | Dear Sir, please explain what you mean by GP, are you referring to Fujiu GSP printers? if so, what models are you looking for. We have GSP3-5000 and GSP3-4000 avaiable for immedate sale at $25,000 each. F
Electronics Forum | Wed Jan 21 04:07:09 EST 2015 | xboxhaxorz
Most serious rework stations are from ersa, pdr etc; We actually wanted a fully automated system with split vision and in USA that would probably cost around $50k. We decided on a ZX360 which is about 300 lbs and it worked quite well without issue fo
Electronics Forum | Tue May 18 03:17:50 EDT 1999 | Philip B
| | Hi Guys, | | | | I am going to be graced with the good luck of processing microBGA's in the near future. A bit of a step forward from printing 20-mil pitch and wave soldering 0805's, wouldn't you say? | | | | So, any of you folks who have alre
