Electronics Forum | Mon Mar 20 15:41:00 EDT 2023 | oclsc
Hallo SMTnet. We have just bought a VXS Air 3.2/634 Rehm reflow oven. We are wondering why the conveyor chain in the oven is still running two days after the "Auto OFF" precedure/program has been activated. In this case the oven set to "Auto Off" Fr
Electronics Forum | Mon Mar 20 22:08:24 EDT 2023 | tey422
For reflow oven to "auto off" it has to go through the cool down; it should be off went the cool off temperature is reached. Perhaps you need to 1st check if something prevent the oven reach the cool off temp (both hardware & software).
Electronics Forum | Tue Mar 21 11:57:27 EDT 2023 | stephendo
Or after a preset amount of time. Maybe the oven has a setting somewhere that is not set propely.
Electronics Forum | Fri Jan 28 19:24:15 EST 2011 | jlawson
Should contact Rehm Thermal they have a whitepaper on pros and cons of Vapor Phase vs Convection.... Vapor phase traditionally targeted heavy PCB, large mass products better then lighter ones, due to ramp rate control being harder to attain vs say a
Electronics Forum | Tue Mar 20 08:04:47 EDT 2018 | spoiltforchoice
Those of us doing low volume with mesh ovens and double sided boards will often use the titanium strips used for making boards more rigid for wave soldering. Gives you enough clearance for lower profile items that you would typically find on the firs
Electronics Forum | Fri May 15 21:39:48 EDT 2015 | jlawson
Reflow.. 1.Rehm (Germany) - Best in Class Best overall process stability heating system ( Alot of makers have started to copy there VX heating arrangement ). COnveyor chains can be a bit more attention in terms of maintenance on rehm , but if foll
| 1 |
winsouce.jpg)