Electronics Forum | Fri Aug 23 14:23:12 EDT 2013 | cyber_wolf
Try re-seating the Cognex card and the connectors that plug into it. Make sure the fans on the drawer are clean and functioning. Ive seen bad camera cables cause this as well.
Electronics Forum | Wed Dec 06 17:22:03 EST 2023 | madisreivik
Hello and help ! After changing oil hose, cleaning machine and all nozzles, CP642 narrow camera started to flicker. And in nozzle centering measuring, no image at all. We checked syncro pin, seems ok. Also checked camera picture with Sony monitor,
Electronics Forum | Sat Aug 26 09:40:27 EDT 2017 | v037022
Dear, My current method incluce steps below: 1. take out all screw 2. Put them into alcohol 3. Clean it with bemcot paper which wet by alcohol 4. Dry it by air gun 5. Checking by Dino camera. It took so much time. Now i want to do it automatic to red
Electronics Forum | Fri Apr 24 13:55:09 EDT 2015 | duchoang
- Clean nozzles. - Clean camera. - Adjust lighting. - Check tolerance level. Good luck.
Electronics Forum | Wed Sep 09 08:28:56 EDT 2009 | thanh
have you try to adjust lighting level . are there any object over the camera??? try to clean the camera len and adjust focus, see any help.
Electronics Forum | Wed Sep 07 11:45:05 EDT 2005 | GEB
The camera on the head of my Universal GSM1 (1994/5 model) displayed interference, and then the live video from it went red. This has never happened before. I've tried re-starting the machine, wriggling the camera feed wires, cleaning the lens etc. D
Electronics Forum | Tue Mar 30 06:27:22 EDT 2010 | ristikas
It happens on the middle of the stecil cleaning. The camera and the cleaner will stay under stencil in half way back. Then machine asking the initate the motors. If to press initate then the pcb stopper will hit the rails. Usually we move camera and
Electronics Forum | Wed May 09 18:36:00 EDT 2001 | pzohbon
What are some cleaning options? Or is it a camera issue? Not all our boards need the fiducials cleaned so it is hard to tell.
Electronics Forum | Sun Sep 15 04:45:22 EDT 2013 | jandon
Cleaning and lubrication requires maintenance training. You can really break something if you don't know what you are doing. For example you can break your expensive rubber nozzles or cameras with inappropriate cleaning. Check: - Piping and joint -
Electronics Forum | Wed Oct 30 15:23:58 EDT 2024 | tey422
not sure what the error means, have you try to clean the camera lens first and retry again?
