Electronics Forum | Mon Feb 14 14:59:44 EST 2000 | hany a. salam
Hello there: We urgently need a 45mm FRONT CAMERA to be installed on a Philips pick & place M/C. The M/C model is EMERALD & it is one of the GEM line series. The camera should manage to visualize the BGA components. Please if anyone can give a hand
Electronics Forum | Mon Feb 14 16:53:43 EST 2000 | Carol Aviles
Mr. Salam, By contacting Philips at 1-800-4Philips (1-800-474-4547) our technical support group will provide you with free technical support regarding your Emerald and camera requirements. Regards, Carol Aviles
Electronics Forum | Thu Sep 08 18:01:22 EDT 2011 | comatose
We had a camera die on one of our GSMs. I got a new camera, and it is working, but I need to either find a cal kit to rent for a day, or else if someone knows a reasonably accurate procedure to calibrate the new camera using the other upward looking
Electronics Forum | Thu Mar 14 19:08:56 EST 2002 | stevezeva
Hi ya'll! I know this is going to be an extreme longshot, but I'm in desperate need of a Assemblion Emerald 54mm front light camera mirror (part number 5322-380-10285). Ours got cracked somehow (still haven't found out how, probably never will...
Electronics Forum | Sun Sep 25 20:20:22 EDT 2011 | johnyq
We recently aquired an old MPM-AP25 stencil printer that printed paste with a large error (about .060 inches). I concluded camera alignment to be the cause but was surprised by the magnitude. I found the camera beam splitter prism misaligned and loos
Electronics Forum | Thu Aug 26 20:35:33 EDT 2021 | kumarb
Hi. Have the Emerald-X (Yamaha YV88X) unit. Works fine. Using F9 (Teach & Trace), we can position to most locations on the front feeders (not to the extreme left or extreme right due to the head design). Should the unit be able to do the same for t
Electronics Forum | Wed Jan 10 21:03:02 EST 2024 | madisreivik
Vision error found: YOU MUST CHANGE LAMPS SOMETIMES ! Also, the camera front-glass (with the cutout) must be correctly positioned :) Still looking the Q error on left head. Probably mechanical problem...
Electronics Forum | Sun Nov 22 18:03:38 EST 2015 | ttheis
Hi Deni- Thanks for the reply. I'll try to figure out what vision system is on it. I know it has two 5.3mil cameras front and back, UPS 3.2.2c os/2. Where do I determine the type of vision system; in the computer or harware spec plate?
Electronics Forum | Wed Apr 24 07:06:56 EDT 2019 | griinder
You need two calibration jigs to calibrate these cameras. There is an L-Type align offset jig that involves removing the front feeder base, and placing the target dot over the middle camera of your front camera bank. After this calibration is done, t
Electronics Forum | Tue Sep 20 12:38:05 EDT 2005 | Mark
Hallo, I have a problem with Topaz Xi with FNC nozzles. We have front, back and single camera in Topaz Xi. When i am using front camera and placing SO8, TSSOP14, TSSOP16 etc, using nozzles 73F the accurancy is ok. But when i switch to the back cam
