Electronics Forum | Wed Feb 22 09:48:24 EST 2006 | slaine
Hi Ive checked into this a bit more, there are two coatings im told you can get one is a teflon coating that you paint on then bake, the other is a red oxide (lead free) paint. Also if your using solder pots and they are close grain cast iron they a
Electronics Forum | Fri Nov 27 15:46:28 EST 2009 | jrr3434
Would i be able to use the cast iron pot from my electrovert with out any problems? I thought the tin would dissolve the iron in the pot? This lead free thing is a headache!
Electronics Forum | Mon May 16 18:03:30 EDT 2005 | davef
Key Issue: Will this machine solder your boards? You never know until you solder one. Any other avenues of analysis involve substantial risk. Flux Selection * High or low solids * VOC or VOC-free Solder Alloy * If using lead-free, avoid stainles
Electronics Forum | Thu Sep 17 12:10:57 EDT 1998 | Steve Gregory
| | Hi Folks, | | Need to draw upon the vast expertise in this forum... | | Whenever you fill a new wave solder machine with fresh bar solder, it seems to produce more than the normal amount of dross for a few weeks. I always understood this to be t
Electronics Forum | Fri Sep 18 09:58:27 EDT 1998 | Chrys
| | | | Hi Folks, | | | Need to draw upon the vast expertise in this forum... | | | Whenever you fill a new wave solder machine with fresh bar solder, it seems to produce more than the normal amount of dross for a few weeks. I always understood thi
Electronics Forum | Thu Jun 30 18:40:06 EDT 2005 | KEN
What your asking has many variables. 1. Material: SS vs. Cast Iron. Iron is thicker. Which SS? 316, 316L 2. Pump speeds, turbulence, hours of operation directly affect equipment life. 3. Things like scraping the pots, the tunnels, impelle
Electronics Forum | Wed Dec 10 03:15:43 EST 2008 | meritajs
We have had expierience to convert our wave solder machine EPK1(1995g)with cast iron solder pot for lead free SN100.It runs about year and half now without problem.
Electronics Forum | Sat Mar 19 11:31:51 EST 2005 | fastek
Electrovert provides a lead free retro fit kit for your Econopak Gold machine...as long as you have a cast iron solder pot. $10K-$12K for the kit.
Electronics Forum | Wed Nov 28 18:24:05 EST 2001 | mparker
Back in the days when pots, skillets, etc. were made of cast iron, vegetable oils were used to "season" the iron to prevent rusting and also from the food sticking to the pot during cooking. It would be reasonable to believe that you could use the sa
Electronics Forum | Thu Jul 22 22:18:12 EDT 2004 | davef
Notes from an AIM No-Lead Presentation ... Wave Soldering * May require a higher pot temperature than tin/lead: 255-265*C * May require a change in liquid fluxes to compensate for the poor wetting of some alloys and high thermal stresses of the wave
| 1 |
