Electronics Forum | Thu Sep 23 23:51:49 EDT 2004 | Chics
Hii, Can anyone give some info on how to assemble a gsm cell phone, machinery, methods, techniques used.... and what sort of inspection techniques and equipments are used and what are the costs associated with it Please reply.
Electronics Forum | Fri Sep 24 03:59:50 EDT 2004 | FengAng
Maybe you can get these information from me, because our company are the producer of cellur phone. My e-mail:xufengang@zte.com.cn
Electronics Forum | Fri Sep 24 05:34:12 EDT 2004 | FengAng
Hi Rob, I don't think you're so right about this thing. In China, there're so many companies that are using the most advanced equipments in the world. Machines using in Europe can also be found in China. In my company, we have the equipments like S
Electronics Forum | Fri Sep 24 04:11:13 EDT 2004 | rob
Hi Chics, It all depends on where you are in the world - in Europe robots were used back end (Ericsson), and usually Fujis front end (Motorola, Nokia, Ericsson). In China you're obviously not going to need the Robots.... Cheers, Rob.
Electronics Forum | Thu Sep 30 05:43:44 EDT 2004 | peter016
SMT equipment is just part of the capital investment. Another big chunk of invesment is the test equipment. You have a choice of R&S CMU or Agilent Mementum test box.
Electronics Forum | Thu Sep 30 05:51:14 EDT 2004 | peter016
SMT equipment is half of the investment. The other half is the test equipment. The popular choice for test equipment are either R&S CMU or Agilent. For GSM/GPRS, it's about US50K per piece.
Electronics Forum | Fri Sep 24 08:19:35 EDT 2004 | Rob
Hi FengAng, Sorry about the misunderstanding - last time I was out there all of the front end SMT equipment was very good, but the final assembly of the phones into cases was being undertaken by hand, whereas in Europe we were seeing a lot of automa
Electronics Forum | Sun Oct 10 13:01:46 EDT 2004 | Johnathan
Hello I am a businessman located in Atlanta Georgia USA. The name of my business is Techmania. We area a technology sales and service company. What do you think of the possibilities of purchasing from European and Asisn manufacturers the parts near
Electronics Forum | Fri Sep 24 22:43:07 EDT 2004 | FengAng
Hi Rob, We use the most advanced equipments in front end, but the back end we always use manual assembly, including display, LCD, casing. It's all because we should balance the cost & efficiency. I think if you are the boss, you will also do thing
Electronics Forum | Mon May 12 11:01:43 EDT 2008 | vms
Sr Tech We have worked on mpm since 1995 and when I worked for mpm I thought I knew the machines very well. After being self employed since 1998 we realized that we didn't know hardly any thing. I charge a very small amount for a year of tech suppo
