Electronics Forum | Thu Jan 29 11:46:40 EST 2015 | aj
Hi all, Long shot but worth a try, I am trying to identify ref: L1 Inductor which is on the back of the above mentioned cognex card ( green camera Dek GSX265 machine). Card functions fine but doesn't output any video - L1 is blown on the back whic
Electronics Forum | Tue May 26 23:42:20 EDT 2020 | smiran082
Hello, I am having trouble the QSV-1 PNP machine. On boot it had trouble connecting to the RT computer as it was hung on a message saying something along the lines of, "Establishing connection to RT computer". After several restarts we still could
Electronics Forum | Tue Aug 15 10:55:23 EDT 2006 | chrisgriffin
Some software versions won't allow a brightness change with the next button. You should do a histogram test. Place a board on the worknest, then a smooth white card on top of that. Then jog the camera over the card. Raise the Z-axis to it's softwa
Electronics Forum | Tue Aug 15 09:40:43 EDT 2006 | SWAG
Not sure about 2020 but AP's have an option to perform a histogram test/adjustment on the lighting. It's a black card, white card test and you can adjust a pot. in the machine to make the histogram curve "best-fit". On an AP, you find this option i
Electronics Forum | Fri Aug 23 14:23:12 EDT 2013 | cyber_wolf
Try re-seating the Cognex card and the connectors that plug into it. Make sure the fans on the drawer are clean and functioning. Ive seen bad camera cables cause this as well.
Electronics Forum | Mon Feb 10 08:18:18 EST 2020 | astarotf
Hi We have an Accuflex MPM with camera vision problems which shows no image, only the screen looks gray. With the diagram we show that our MPM camera is receiving the appropriate 12V voltage on pin # 6 of the camera and supplies the video output on p
Electronics Forum | Mon May 16 22:06:22 EDT 2011 | danaherr
Downward looking camera not working. swapped cables on board and upward looking camera works when plugged into downward camera's connection on video card. Thinking maybe a cable issue??? manually moved gantry all over trying to see if intermitent ope
Electronics Forum | Fri Aug 23 00:27:07 EDT 2013 | comatose
I have an AP25 printer, which has served us fine for years. A couple days ago the top quarter of the vision display went all "wiggly" and now it won't find fids. The PC and monitor are fine, so its definitely something in the vision system. Before
Electronics Forum | Mon Sep 02 15:20:48 EDT 2013 | aemery
Interesting! not the usual error. In my experience when the vision cables get damaged it shows up and white noise flashes across the monitor. The connections are the easiest to check so here's your system layout with connection points. Starting at
Electronics Forum | Tue Mar 17 16:09:25 EDT 2009 | gregf912
For the IP3 to reliably place BGAs the machine needs the 4800 vision card and type 12 camera. From the problems i see here you must have the 4400 card and a type 8 or 9 camera. It would also seem that a calibration is in order. I have calibrated and