Electronics Forum | Thu Apr 28 11:14:27 EDT 2005 | bbarr
If you apply the RTV after coating, what happens to bond strength since you are now bonding to the coating and not the board? Will the caps still survive vibration and shock? I specify applying RTV before coating for this reason. Am I correct? I als
Electronics Forum | Thu Apr 21 10:44:35 EDT 2005 | jdumont
Morning all. So today I have been tasked with conformally coating a few of our first run PCBs for a new product line. The problem is that they have already had all the larger caps potted with RTV. Are there any problems with spraying the CC over the
Electronics Forum | Thu Apr 21 11:43:03 EDT 2005 | davef
We understand the problem of trying to coat over RTV. We have seen the same problem with acrylic and urethane coatings not wanting to stick to RTV. Some acrylics seem to be worse than urethane. Since this is a new product, may be you could pot your
Electronics Forum | Fri Oct 22 18:57:25 EDT 2010 | jry74
I am having a horrible time with the square radial lead capacitors (thru hole components) and the part coating flowing into the solder joint. These are Class 3 products. When we run them through the wave solder machine, the solder travels up the le
Electronics Forum | Wed Feb 01 09:10:37 EST 2006 | slaine
or conformal coat the cap.
Electronics Forum | Thu Mar 07 02:22:21 EST 2019 | abhilash4788
Can you suggest cost effective 3D printer for making conformal coating caps. And please let us know what you have considered.
Electronics Forum | Fri Jan 12 06:45:52 EST 2024 | calebcsmt
When conformal coating a PCB, when it comes to components such as alum caps, if no keep-out specified for SMT, would you recommend coating the entire component, or would you only coat the bottom portion (where conductors/leads are present) Moreover,
Electronics Forum | Tue Jun 22 00:20:21 EDT 2010 | leadthree
Pick & Place > Wave-solder > other parts > test > conformal coating Is there any production error that could make a ceramic cap conductive? PS: want to add one point: The caps don't seem to be cracked. We changed a few 100 and didn't notice any bro
Electronics Forum | Fri Jun 25 00:16:11 EDT 2010 | leadthree
I got a report from Yageo yesterday with microsections and and and..... result: Cracks I did a test run on boards after ICT, but before coating. They are all ok. Seems the cracking happens somewhere after the ICT. But at that stage all assembly is a
Electronics Forum | Thu Jun 24 11:21:40 EDT 2010 | floydf
Hi, > > I have a 100nF 0805 ceramic cap (the most > common type!), Yageo brand (20+ pcs. on the > module). In our production run I get some errors > due to conductive caps (can be anything from 25 > Ohm to 5K - most are open of course). Only one