Electronics Forum | Wed Nov 28 06:06:18 EST 2018 | msbettyhunt
Even, proportional–integral–derivative (PID) algorithm works well in this case.
Electronics Forum | Wed Dec 12 07:59:07 EST 2018 | mermarinc
@BettyHunt, thanks for sharing.
Electronics Forum | Tue Oct 16 10:06:41 EDT 2018 | emeto
Hello experts, I have an assembly that goes through pretty tough sterilization on regular basis. Currently I am using a two component material in potting process. I was wondering if you can help me with material that can handle high temp and humidit
Electronics Forum | Wed Oct 17 02:04:39 EDT 2018 | robl
SCC3 has an operating temperature of 200C, as long as it is heat cured at 100C. https://www.electrolube.com/pdf/tds/044/DCA.pdf It's also a silicone so needs to be coated & cured away from anything you value. Otherwise there are plenty of PU's and
Electronics Forum | Thu Nov 01 12:52:18 EDT 2018 | emeto
Thanks Rob, It looks like my customer wouldn't let me to change the material. However, this potting material still sticks to the non sticking fixture that I have. Can anyone give me a non sticking material that I can make these fixtures out of?
Electronics Forum | Tue Nov 27 08:40:24 EST 2018 | ethanscott
I don't think could suggest anything different than what Rob has suggested. It's really nice to have such information. Thanks, Rob for sharing it.
Electronics Forum | Tue Jan 10 16:01:20 EST 2017 | davef
A review document for J-STD-001F with Amendment 1 had the following wording, but you should check the actual document to be sure of correctness 4.2 Facilities Cleanliness and ambient environments in all work areas shall [D1D2D3] be maintained at le
Electronics Forum | Wed Jan 27 09:00:56 EST 1999 | Chris Fontaine
| | I have boards coated with Humiseal 1B73. At a late point mfg. site we need to remove a series of 0603 resistors for optioning purposes. I have been trying to determine the fastest, easiest way to re-coat the pads after removal. Drying time of the
Electronics Forum | Tue Mar 09 23:34:35 EST 1999 | Clarissa Ortner
We are starting up an SMT line with a printer and convection oven.... The area we are considering for the printer is totally uncontrolled for humidity, temperature and even cleanliness. We are working on the filters to keep particulates down, but I
Electronics Forum | Mon Jan 26 19:51:48 EST 2004 | davef
You should be able to obtain a smooth finish. A "glass-like finish" is in part a function of the coating material, assuming good process. When we see "orange peel" conformal coating, we think moisture from the spray room environment, conpressor, et