Electronics Forum | Sun Sep 04 01:59:41 EDT 2005 | smartasp
We need to dry and clean the air in our dedicated poting and conformal coating room. Can anybody help on how to go about it. The airconditions only recycle and dry until room temperature is reached and therefore have great fluctuations and unstable p
Electronics Forum | Wed Aug 04 08:08:10 EDT 1999 | Paul O.
| | We're getting field failures in a high impedance portion of the circuit. Think the unpopulated pc card has contaminates because we were able to grow dendrites by applying a 9 volt battery across the suspected pad, placed a drop of de-ionized wat
Electronics Forum | Fri Aug 28 08:52:13 EDT 2009 | duso02
Yes, you must thin Dow CC for any spray operations. We use Dow 2577 daily for multiple customers and we always thin it for spray operations and 2577 is considered medium viscosity. Dow recommends using up to 60% solvent (Xylene). Your 2620 is low vis
Electronics Forum | Wed Feb 27 13:11:04 EST 2008 | tonyamenson
I was asked to post my finding about HumiSeal stripper for polyurethane coating. Both as an information sharing as well as someone who may offer advice on teh situational use of 1063 solvent stripper. So here is what I found: The stripper worked t
Electronics Forum | Tue Apr 20 22:09:03 EDT 1999 | Earl Moon
| | I am wondering if anyone has any info regarding solder paste misprint clean-up procedures for Entek Plus CU-106A PCB's utilizing a water-clean solder paste. In a implementation procedure they recommend a 2-3 minute wash cycle with the following
Electronics Forum | Wed May 22 08:43:40 EDT 2002 | pjc
I have experience cleaning NC for military boards. The reason for cleaning the NC is due to conformal coating requirements. Zestron Vigon A200 and Atron AC 100, as well as Petroferm Hydrex DX have both been effective at cleaning Alpha UP78 NC paste.
Electronics Forum | Sat Jan 06 22:09:53 EST 2001 | Greenman
Cory, I've got a lot of experience of testing of this type. The physical (not chemical) nature of the flux residues is the crucial issue in compatibility. If you have a softer residue (either caused by a thick initial solder paste deposit, or a low p
Electronics Forum | Tue Apr 20 16:41:52 EDT 1999 | Justin Medernach
| I am wondering if anyone has any info regarding solder paste misprint clean-up procedures for Entek Plus CU-106A PCB's utilizing a water-clean solder paste. In a implementation procedure they recommend a 2-3 minute wash cycle with the following cr
Electronics Forum | Thu Mar 09 10:19:24 EST 2000 | Ashok Dhawan
I have a question (s) on ESD- all related to use of wood in a typical PCB Assembly line: 1. How a wooden mini stool if used for holding tote box ( card board with static protecive coat, black color) can affect static sensitive devices inside the tot
Electronics Forum | Thu Mar 09 10:19:24 EST 2000 | Ashok Dhawan
I have a question (s) on ESD- all related to use of wood in a typical PCB Assembly line: 1. How a wooden mini stool if used for holding tote box ( card board with static protecive coat, black color) can affect static sensitive devices inside the tot