Electronics Forum | Thu Dec 02 23:43:23 EST 1999 | Kantesh Doss
We have a serious misalignment problem of D-Pak components (Specifically Motorola's part number MJD-3055/MJD-2955)following reflow soldering process. We are using Alpha Metals UP78 solder paste. Our reflow oven is Nitrogen inerted and our oxygen leve
Electronics Forum | Sat Dec 04 09:23:20 EST 1999 | Christopher Lampron
Kantesh, Does this particular part have a heat sink across the bottom side of the component and does your pad size and stencil aperture match the component? I have just had a very similar problem with a DPAK. What we found was that the recomended pad
Electronics Forum | Mon Apr 26 09:18:15 EDT 2010 | sudhir14
Hi, friends Need your urgent help on bellow issue ....... we are facing issue of misalign of one bulky SMT transformer during the placement itself rejection @40% & after reflow rejection @5 % using SMT m/c QP242 , placing this component at end of al
Electronics Forum | Mon Dec 06 17:50:39 EST 1999 | Kantesh Doss
Christopher: Thank you for sharing your experience about the DPAK. Yes, out part has a heat sink at the bottom. Our stencil opening was 7 mils (in both X and Y) smaller than the pad size excepting that the stencil opening consisted of a series of zeb
Electronics Forum | Sat May 08 07:03:31 EDT 2010 | aj
From looking at your images I would say it could be poor solderability on the terminations of the component itself. Can you get your hands on a different date code and try them out?
Electronics Forum | Fri Apr 30 00:20:33 EDT 2010 | sudhir14
We are using QP fuzi m/c during the placement of comp. PCB is fixed & placement head is movable This component is placed at last but still we are getting the problem Comp. is placed with slowest setting also slowest comp. transfer speed of nozzle h
Electronics Forum | Sun May 02 11:36:27 EDT 2010 | jdeluna
I do agree with Jerry: you should apply more paste on it, either with a step stencil, or doing overprint on it by, let's say 120% on Transformer's pad. Also, you need to check : a) there's smooth movement on transport process after the placement, no
Electronics Forum | Mon Aug 20 05:53:26 EDT 2007 | erhard
Hello all, we are about to modify a Universal Radial 5 so the machine will be able to insert radial components with lead pitch 3.5mm and 5mm. The 3.5mm components are ELCOs which are getting inserted all the way to the component body so they sit fi
Electronics Forum | Tue Sep 26 10:44:28 EDT 2006 | Brad Courtemanche
Hi larry, don't know if you resolved your problem but if machine is picking part three times, rejecting all three but places number fourth your nozzle pickup is misaligned very slightly. During the first three pickups the nozzle is finally seating it
Electronics Forum | Fri Jul 21 12:04:09 EDT 2006 | CKH
Hi Folk, recently, i have faced some issue on Components Misaligned (1 pad size way). What could have cause this issue... Thks & Warmest Rdgs CKH
