Electronics Forum | Tue Dec 01 14:47:57 EST 2009 | kjs123p
I am wondering what other Conceptronic users are using to oil the chain, lubricate the lead screw, and the grease used on the chain drives. I have contacted Conceptronic, and they gave me recommendations, but I am having trouble contacting them. Than
Electronics Forum | Fri Oct 27 09:42:12 EDT 2000 | Daniel Carlsson
I wonder if anyone have experience from using a fairly new reflow oven and would like to share your toughts (advantages or disadvantages) with me. I�m especially interested in: Conceptronic, Electrovert, ERSA, Heller, Quad, Rehm, Seho, SMT or Vitroni
Electronics Forum | Wed Jan 07 13:17:56 EST 2004 | James
We currently have 2 HVA 102 conceptronic reflow ovens. I ran 2 profiles on the 2 seperate machines. One of the oven ran 7 degrees lower than the other oven. I checked all the fans and they seem to running fine. I get no warning on the monitors.
Electronics Forum | Tue Dec 01 18:01:17 EST 2009 | swag
I should add we use one listed lube from each recommendation and were able to find everything (although that was close to 10 yrs. ago). We bought enough to outlast the oven so we haven't had to buy any since. The oven is still going strong!
Electronics Forum | Tue Dec 15 09:21:49 EST 2015 | fuji_user_2014
Can you please contact me? We may have work for you related to Conceptronics HVA102 oven. Our oven is not showing any readings from thermocouples. We suspect bad special function card? My number is 774-553-6644, ask for Greg.
Electronics Forum | Thu Oct 16 10:02:12 EDT 2003 | marcelll
Hello All We have here a Conceptronic oven running under Win 3.1 and the password have been lost. Is there a trick to find it in some files or do we have to reload the firmware ? Thanks
Electronics Forum | Thu Jan 08 16:21:05 EST 2004 | Bill
James: The ovens can be calibrated to help get this a little closer. In the computer box are 3 cards (alike) attached to the motherboard. They are called IPS-7 cards. On these cards are 2 potentiometers to calibrate the T/Cs for the heat zones. There
Electronics Forum | Mon Oct 05 10:08:54 EDT 2015 | swiese242
I have a HVC 102 reflow oven that will randomly shut down for over/under heat. On the 601 overheat protection zone 4 will read over 500c. Has anyone had this problem?
Electronics Forum | Mon Oct 12 07:12:45 EDT 2015 | swiese242
Thanks! it was one of the T/C not over the hole. After looking all them over I had 3 not over the hole. Oven is running fine now.
Electronics Forum | Wed Dec 16 07:09:36 EST 2015 | jdengler
I have seen bad transistors on the expansion boards cause no display of temperatures from the thermocouples. Jerry