Electronics Forum | Wed Jan 27 09:00:56 EST 1999 | Chris Fontaine
| | I have boards coated with Humiseal 1B73. At a late point mfg. site we need to remove a series of 0603 resistors for optioning purposes. I have been trying to determine the fastest, easiest way to re-coat the pads after removal. Drying time of the
Electronics Forum | Mon Sep 30 16:16:17 EDT 2019 | stephendo
We use "Uline N95 Deluxe Industrial Respirator" face masks. We are looking for something better. Our conformal coating machine has an active exhaust pulling fumes out and the door is closed when the machine is running. We have a fume hood with an act
Electronics Forum | Thu Jul 05 22:56:53 EDT 2007 | gyverlo
Hello Sirs: Recently we are having an issue with environmental stress (high humidity or moisture), so we decide to apply conformal coating on our motherboard to protect via holes. According to IPC-A-610D, spec of thickness for type AR is 0.03~0.13 m
Electronics Forum | Wed Sep 02 11:36:22 EDT 2009 | kpm135
Is this an established process that is just now exhibiting these problems, or is this a brand new process you're just setting up? What is the rest of your process like? What is done to the boards before you coat them? Water washed? Solvent washed? Sa
Electronics Forum | Tue Jul 03 01:54:42 EDT 2018 | rdhiman1
Reaching out to all conformal coating experts, please help! While setting up conformal coating using the automated atomized spray, we observing issues associated with conformal coating wetting on the following regions: 1) Component edges 2) Metalli
Electronics Forum | Fri Aug 28 08:52:13 EDT 2009 | duso02
Yes, you must thin Dow CC for any spray operations. We use Dow 2577 daily for multiple customers and we always thin it for spray operations and 2577 is considered medium viscosity. Dow recommends using up to 60% solvent (Xylene). Your 2620 is low vis
Electronics Forum | Wed Sep 19 12:27:52 EDT 2012 | tombstonesmt
Looking into possibly receiving samples of polyester masking dots for conformal coating. Our usage of polymide dots have really increased in the past months and we're always looking for a reduction in costs. The only information I've found is that po
Electronics Forum | Fri Jun 12 17:02:36 EDT 2009 | stevek
How does the cost of these machines compare to setting up a spray booth? The large outsource coating houses around here all spray from a gun in a booth instead of using machines. Is there a breakpoint in volume where the machines make more sense?
Electronics Forum | Wed Jul 22 15:35:44 EDT 1998 | Katy H
Check out Precision Valve & Automation Latham, NY Phone: 518-782-3436 They make a relatively inexpensive system for applying material. You can choose spray or valve dispensing or both. The product is built simply and has been relatively easy to set
Electronics Forum | Fri Oct 07 09:05:12 EDT 2005 | chunks
There's a ton of em'. We used the one from Paul N. Gardner Company, part # WF-CCD. They cost 0.95 each, so if someone decides the gage looks better in their garage, it's not that big of a deal. We set up a program that puts down 4 stokes on a test
