Electronics Forum | Wed Apr 20 13:13:20 EDT 2016 | ttheis
Hi Guys, Yesterday one of our two gsm1 machines just stopped moving and let down the board mid-production. The epc computer continued to respond but no messages were displayed when palming up or down. I tried local IO and it said no IO was configure
Electronics Forum | Fri May 06 17:03:03 EDT 2016 | ttheis
A similar issue happened with our second machine the other day. I noticed on both machines that the "BM" light on the sys68k cpu force board goes out when this happens. Does anyone have any insight on what this means?
Electronics Forum | Wed Jun 01 19:42:40 EDT 2016 | marcelll
Usually, that type of error is comming from a damage HDD Corrupted sector or something similar You can reload the firmware but don't forget to backup everything, specially the calibration & mapping files
Electronics Forum | Fri May 06 20:22:02 EDT 2016 | ttheis
I found this in the Force SYS68K CPU-30 manual: ------------ "BM" LED If the CPU board is the current VMEbus master, the green BM LED is lit. This provides the user with a convenient visual indication of the status of the VMEbus. ------------ So th
Electronics Forum | Tue Mar 05 03:13:52 EST 2002 | rkey
hi, yes i know those machine'a are made by YAMAHA !! Philips sels them under a different name. i know this machine (PHILIPS, YAMAHA) uses UFO's and BRD Files! It would be great sending us the software including the manuals! Thnx alot pal. Best rega
Electronics Forum | Sun Mar 03 07:22:03 EST 2002 | rkey
Hi, We've got one CSM60 and one CSM60V! After searching for a long time i've found the CSM Toolbox (/10) for UFO FIles !! Now i want to connect those machine's to a PC but i've tried everyhing but it doesn't work !! Does someone have experiance wi
Electronics Forum | Tue Mar 05 00:11:22 EST 2002 | djarvis
CSM60 - I presume is the same as Yamaha6020/21 series? Are you running UFOS, ie *.brd files and not *.pnt files. Either way I can help if we are talking about the same machine. Please advise and I can send you the software by email and the manuals by
Electronics Forum | Tue May 26 23:42:20 EDT 2020 | smiran082
Hello, I am having trouble the QSV-1 PNP machine. On boot it had trouble connecting to the RT computer as it was hung on a message saying something along the lines of, "Establishing connection to RT computer". After several restarts we still could
Electronics Forum | Thu Apr 26 11:21:26 EDT 2007 | slthomas
Question...when the machine said something was wrong, was it reading something wrong (false failure), or was there a true descrepancy but not one that resulted in a bad connection (bridge or insufficient)? Also, did you perform a DOE on the process
Electronics Forum | Fri Aug 28 19:54:05 EDT 2020 | emeto
From what you explain: 1. check all movements X,Y and Z are moving free while machine is off. 2. Resit all driver cards. 3. Check interface cables or boards. Not sure if Juki is using CAN or other interface standard, but random motor errors might be
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100