Electronics Forum | Tue Mar 14 16:26:45 EST 2006 | patrickbruneel
BeCu is not solderable without plating Cu, Sn, Ag, Ni etc. The solder joint will only be as strong as the bond strength of the solderable plating to the BeCu Pat
Electronics Forum | Thu Nov 14 10:03:40 EST 2002 | davef
Doug, Ooooooooo. You're correct Vinny has to be talking about Rogers teflon boards. Vinny, There are many different types of PTFE based products. Generally speaking, PTFE has a melting point of 620degF and withstands solder reflow and HASL proce
Electronics Forum | Fri May 25 08:06:19 EDT 2007 | davef
Soldering PTFE boards * Exposure to the high temperatures needed for solder reflow poses no problem of loss of peel strength since the exposure times are relatively short. * There are many different types of PTFE based products that may perform diff
Electronics Forum | Wed Aug 15 16:08:02 EDT 2001 | davef
A properly formed solder connection is stronger than the underlying copper to laminate bond. Measuring pad peal strength: IPC-TM-650, Method 2.4.21 for multiple solderings, use Method 2.4.8 for copper peal using an Instron machine. Typical requiremen
Electronics Forum | Mon May 29 23:39:11 EDT 2006 | Faizal
Can anyone advice me on the effect of SN100C wave solder on SAC305 hasl board? I suppose the silver content on the hasl pcb would leech(contaminate) into solder pot.? Would it affect the surface bonding between copper pad and the solder.?
Electronics Forum | Tue Mar 13 20:47:39 EDT 2018 | davef
I think of palladium coated copper with gold flash (CuPdAu) as bond wire used in chip attach. Look here: https://www.heraeus.com/media/media/het/doc_het/products_and_solutions_het_documents/bonding_wires_documents/fact_sheets/Factsheet_PdFlash.pdf
Electronics Forum | Tue May 23 20:39:37 EDT 2000 | Dave F
Scott: Sounds like fun: � Solder joint strength in pull/shear varies with lead geometry, solder volume, lead metal/metallization, and the test method. � Among things, IPC-TM-650 talks to getting pads off-of boards. For instance: Method 2.4.8 is for
Electronics Forum | Fri Oct 26 17:01:52 EDT 2001 | davef
We process no Teflon boards. Companies, such as Rogers and Taconic, make laminates of Polytetrafluoroethylene [PTFE] er �Teflon�. Common �Teflon� laminates are: * Woven glass / PTFE * Random microfiber glass / PTFE * Ceramic / PTFE * Woven glass /
Electronics Forum | Tue Feb 01 12:52:19 EST 2005 | jbrower
Hi Tom, I did talk to Bob Gilbert about the sn100c. His comment is that it is a nickle stabalized alloy. Simplisticly, the tin and copper molecules would rather bond with the nickle. He also mentioned that with the SAC alloys, the manufactuers were
Electronics Forum | Mon Aug 27 15:06:29 EDT 2001 | davef
This otta push Wolfgang over the top ... Recommended reading G.G. Harman, Wire Bonding in Microelectronics : Materials, Processes, Reliability, and Yield, 2nd edition, McGraw-Hill Electronic Packaging and Interconnection Series, 1997. G.G. Harman, R
